Add optional reset-gpios pin control. If present, de-assert the specified reset gpio pin to bring the chip out of reset. Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: Alexandre Courbot <gnurou@xxxxxxxxx> Cc: linux-gpio@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx --- Documentation/devicetree/bindings/gpio/gpio-pca953x.txt | 4 ++++ drivers/gpio/gpio-pca953x.c | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt index 08dd15f..da54f4c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt @@ -29,6 +29,10 @@ Required properties: onsemi,pca9654 exar,xra1202 +Optional properties: + - reset-gpios: GPIO specification for the RESET input + + Example: diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index d5d72d8..ca2ddea 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -22,6 +22,7 @@ #include <linux/of_platform.h> #include <linux/acpi.h> #include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> #define PCA953X_INPUT 0 #define PCA953X_OUTPUT 1 @@ -754,8 +755,18 @@ static int pca953x_probe(struct i2c_client *client, invert = pdata->invert; chip->names = pdata->names; } else { + struct gpio_desc *reset_gpio; + chip->gpio_start = -1; irq_base = 0; + + /* see if we need to de-assert a reset pin */ + reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) { + dev_err(&client->dev, "request for reset pin failed\n"); + return PTR_ERR(reset_gpio); + } } chip->client = client; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html