RE: [PATCH v10 1/6] drivers/platform/x86/p2sb: New Primary to Sideband bridge support driver for Intel SOC's

["Tan, Jui Nee" <jui.nee.tan@xxxxxxxxx>]

> -----Original Message-----
> From: linux-gpio-owner@xxxxxxxxxxxxxxx [mailto:linux-gpio-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Andy Shevchenko
> Sent: Friday, November 11, 2016 12:07 AM
> To: Tan, Jui Nee <jui.nee.tan@xxxxxxxxx>; mika.westerberg@xxxxxxxxxxxxxxx;
> heikki.krogerus@xxxxxxxxxxxxxxx; tglx@xxxxxxxxxxxxx; dvhart@xxxxxxxxxxxxx;
> mingo@xxxxxxxxxx; hpa@xxxxxxxxx; x86@xxxxxxxxxx; ptyser@xxxxxxxxxxx;
> lee.jones@xxxxxxxxxx; linus.walleij@xxxxxxxxxx
> Cc: linux-gpio@xxxxxxxxxxxxxxx; platform-driver-x86@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; Yong, Jonathan <jonathan.yong@xxxxxxxxx>;
> Yu, Ong Hock <ong.hock.yu@xxxxxxxxx>; Luck, Tony <tony.luck@xxxxxxxxx>;
> Wan Mohamad, Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx>;
> Sun, Yunying <yunying.sun@xxxxxxxxx>
> Subject: Re: [PATCH v10 1/6] drivers/platform/x86/p2sb: New Primary to
> Sideband bridge support driver for Intel SOC's
> 
> On Thu, 2016-11-10 at 17:00 +0800, Tan Jui Nee wrote:
> > From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> >
> > There is already one and at least one more user coming which require
> > an access to Primary to Sideband bridge (P2SB) in order to get IO or
> > MMIO bar hidden by BIOS.
> > Create a driver to access P2SB for x86 devices.
> >
> > Signed-off-by: Yong, Jonathan <jonathan.yong@xxxxxxxxx>
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> 
> 
> > +int p2sb_bar(struct pci_dev *pdev, unsigned int devfn,
> > +	struct resource *res)
> > +{
> > +	u32 base_addr;
> > +	u64 base64_addr;
> > +	unsigned long flags;
> > +
> >
> 
> > +	if (!res)
> > +		return -EINVAL;
> 
> I don't remember the details, one version was quite changed, so, I think
> these lines are not needed anymore.
> 
Noted, these lines will be removed in next patch version (v12).
> > +	/* Get IO or MMIO BAR */
> > +	pci_bus_read_config_dword(pdev->bus, devfn, SBREG_BAR,
> > &base_addr);
> > +	if ((base_addr & PCI_BASE_ADDRESS_SPACE) ==
> > PCI_BASE_ADDRESS_SPACE_IO) {
> > +		flags = IORESOURCE_IO;
> > +		base64_addr = base_addr & PCI_BASE_ADDRESS_IO_MASK;
> > +	} else {
> > +		flags = IORESOURCE_MEM;
> > +		base64_addr = base_addr & PCI_BASE_ADDRESS_MEM_MASK;
> > +		if (base_addr & PCI_BASE_ADDRESS_MEM_TYPE_64) {
> > +			flags |= IORESOURCE_MEM_64;
> >
> 
> > +			pci_bus_read_config_dword(pdev->bus, devfn,
> > +				SBREG_BAR + 4, &base_addr);
> 
> Fix indentation.
> 
Thanks for pointing that out. I will fix that in next patch version (v12). 
> > +			base64_addr |= (u64)base_addr << 32;
> > +		}
> > +	}
> > +
> > +	/* Hide the P2SB device */
> > +	pci_bus_write_config_byte(pdev->bus, devfn, SBREG_HIDE,
> > 0x01);
> > +
> > +	spin_unlock(&p2sb_spinlock);
> > +
> 
> > +	/* User provides prefilled resources */
> 
> Not anymore as far I as I can see. You just return here the result.
> 
Current version is returning status of p2sb_bar function, i.e., 0 on success or appropriate errno value on error. Perhaps you could share the reason of return the result instead of status. 
> > +	res->start = (resource_size_t)base64_addr;
> > +	res->flags = flags;
> 
> --
> Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Intel Finland Oy
> --
> To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at
> http://vger.kernel.org/majordomo-info.html
��.n��������+%������w��{.n�����{��
b���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f