On Thu, Nov 24, 2016 at 9:45 PM, Peter Rosin <peda@xxxxxxxxxx> wrote:
> All other registers on these chips are 8-bit, but reg_sense is 16-bits
> and therefore needs to be moved down one notch.
> This was apparently overlooked in the conversion to regmap, which only
> updated the register locations for the 16-bit chips.
>
> Fixes: 6489677f86c3 ("pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap API")
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
Patch applied.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/3] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 1/3] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Fri, 25 Nov 2016 14:40:33 +0100
- In-reply-to: <1480020320-28354-2-git-send-email-peda@axentia.se>
- References: <1480020320-28354-1-git-send-email-peda@axentia.se> <1480020320-28354-2-git-send-email-peda@axentia.se>
- Follow-Ups:
- References:
- [PATCH 0/3] sx150x update - bugfix, cleanup, last 4 chips
- From: Peter Rosin
- [PATCH 1/3] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
- From: Peter Rosin
- [PATCH 0/3] sx150x update - bugfix, cleanup, last 4 chips
- Prev by Date: Re: Getting at gpio- and pinctrl-devices as a consumer
- Next by Date: Re: [PATCH 2/3] pinctrl: sx150x: sort chips by part number
- Previous by thread: [PATCH 1/3] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
- Next by thread: Re: [PATCH 1/3] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
- Index(es):
 |