Hi all, This is v2 of the series implementing the remainder of the pinmux tables for the AST2400 and AST2500 SoCs. v1 of the series can be found here: https://lkml.org/lkml/2016/9/27/309 The first patch, "pinctrl-aspeed-g5: Never set SCU90[6]", is another fix that should be applied for 4.9. Please let me know if I should send such patches separately, as the series otherwise targets 4.10. v2 is based on 4.9-rc2 as requested in feedback on v1. Cheers, Andrew Significant changes since v1: * Fixes from v1 have been applied, so have been dropped for v2 * A new fix has appeared, "pinctrl-aspeed-g5: Never set SCU90[6]", as noted above * New bindings documents for the SoC Display and LPC Host Controllers, driven by the patch "pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers" * The v1 patch "pinctrl: aspeed: Enable capture of off-SCU pinmux state" has been significantly reworked and is now titled "pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers" Andrew Jeffery (6): pinctrl-aspeed-g5: Never set SCU90[6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) mfd: dt: Add bindings for the Aspeed LPC Host Controller (LPCHC) pinctrl: aspeed: Read and write bits in LPCHC and GFX controllers pinctrl: aspeed-g4: Add mux configuration for all pins pinctrl: aspeed-g5: Add mux configuration for all pins .../devicetree/bindings/mfd/aspeed-gfx.txt | 17 + .../devicetree/bindings/mfd/aspeed-lpchc.txt | 17 + .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 86 +- drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1115 +++++++++++++- drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1514 +++++++++++++++++++- drivers/pinctrl/aspeed/pinctrl-aspeed.c | 66 +- drivers/pinctrl/aspeed/pinctrl-aspeed.h | 33 +- 7 files changed, 2760 insertions(+), 88 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpchc.txt -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html