Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver

[Rob Herring <robh@xxxxxxxxxx>]

On Wed, Oct 26, 2016 at 04:32:28PM -0700, Michael Scott wrote:
> Initial pinctrl driver for QCOM msm8994 platforms.
> 
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@xxxxxxxxxx>, let's put
> a proper pinctrl driver in place.
> 
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
> 
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
> 
> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by Björn Andersson <bjorn.andersson@xxxxxxxxxx>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@xxxxxxxxxxxxxx> and then modified for msm8994 content
> 
> Signed-off-by: Michael Scott <michael.scott@xxxxxxxxxx>
> ---
> 
> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups
> 
>  .../bindings/pinctrl/qcom,msm8994-pinctrl.txt      |  175 +++

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>  drivers/pinctrl/qcom/Kconfig                       |    9 +
>  drivers/pinctrl/qcom/Makefile                      |    1 +
>  drivers/pinctrl/qcom/pinctrl-msm8994.c             | 1400 ++++++++++++++++++++
>  4 files changed, 1585 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8994.c
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html