Re: [PATCH 10/10] hwmon: i2cs-fan: Add hwmon dts binding documentation

[Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>]

> On Oct 10, 2016, at 23:29 , Rob Herring <robh@xxxxxxxxxx> wrote:
> 
> On Fri, Oct 07, 2016 at 06:21:09PM +0300, Pantelis Antoniou wrote:
>> From: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
>> 
>> Adds the I2CS Fan Tray hwmon device tree node documentation.
>> 
>> Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
>> [Ported from Juniper kernel]
>> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/hwmon/i2cs-fan.txt | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/hwmon/i2cs-fan.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/hwmon/i2cs-fan.txt b/Documentation/devicetree/bindings/hwmon/i2cs-fan.txt
>> new file mode 100644
>> index 0000000..4ef880c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwmon/i2cs-fan.txt
>> @@ -0,0 +1,19 @@
>> +Hwmon driver for Juniper fan trays on I2CS Slave FPGA
> 
> This is a h/w description, not a driver.
> 
>> +
>> +Required properties:
>> +
>> +- compatible: "i2cs-fan-hwmon"
> 
> I doubt any fan control h/w has "hwmon" in the name.
> 
>> +
>> +Optional properties:
>> +
>> +- num-fans: fans per tray (default 14)
>> +
>> +- tach-factor: TACH count scaling factor (default 120)
> 
> vendor prefixes needed.
> 
>> +
>> +Example:
>> +
>> +fan-hwmon {
>> +	compatible = "jnx,i2cs-fan-hwmon";
>> +	num-fans = <6>;
>> +	tach-factor = <33>;
>> +};
>> -- 
>> 1.9.1

OK on all three.--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html