Re: [PATCH 02/10] mfd: dt-bindings: Add bindings for the Juniper I2CS MFD

[Rob Herring <robh@xxxxxxxxxx>]

On Fri, Oct 07, 2016 at 06:21:01PM +0300, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> 
> Add device tree bindings for the Juniper I2CS MFD driver.
> 
> Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mfd/jnx-i2cs.txt | 68 ++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
> new file mode 100644
> index 0000000..0ec103b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
> @@ -0,0 +1,68 @@
> +Device-Tree bindings for Juniper Networks I2CS FPGA MFD
> +
> +Required properties:
> +- compatible - Must be one of:
> +	"jnx,i2cs-rcb"	(Routing Engine or Control Board FRUs)
> +	"jnx,i2cs-fpc"	(Flexible Port Concentrator FRUs)
> +	"jnx,i2cs-sib"	(Switching Interface Board FRUs)
> +	"jnx,i2cs-fan"	(Fan Tray FRUs)
> +
> +Optional properties:
> +
> +Depending on the FRU, the I2CS MFD has varied group of sub-devices:
> +
> +Device                   Description
> +------                   -----------
> +jnx,i2cs-gpio		: Virtual gpio mapping driver
> +jnx,i2cs-fan-hwmon	: hwmon driver for fan trays
> +jnx,i2c-mux-i2cs	: I2C Mux driver for FPC FRUs
> +jnx,leds-i2cs		: Led driver
> +
> +All these optional nodes are described in their respective binding
> +documents.
> +
> +Example node:
> +
> +i2cs@54 {
> +	compatible = "jnx,i2cs-fpc";
> +	reg = <0x54>;
> +	#address-cells = <0>;
> +	#size-cells = <0>;
> +
> +	fpc2_mux {

Generic node names please.

mux { 

> +		compatible = "jnx,i2c-mux-i2cs";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		fpc2i2c0: i2c@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +		};
> +	};
> +
> +	fpc2_gpiomap: gpio-jnx-i2cs {

gpio@54 {

> +		compatible = "jnx,gpio-i2cs";
> +		reg = <0x54>;
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		interrupt-controller;
> +
> +		/*
> +		 * Map bits [0-3] of reg 0x21 as gpio inputs, bits [4-7]
> +		 * as gpio outputs
> +		 */
> +		i2c-gpio-map = <0x21 0x0f>;
> +	};
> +
> +	leds-jnx-i2cs {

leds {

> +		compatible = "jnx,leds-i2cs";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		sib8-active {
> +			reg = <0>;
> +			linux,default-trigger = "sib8-active";
> +		};
> +	};
> +};
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html