Re: [PATCH 02/10] mfd: ptxpmb-cpld: Add documentation for PTXPMB CPLD

[Rob Herring <robh@xxxxxxxxxx>]

On Fri, Oct 07, 2016 at 06:17:23PM +0300, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> 
> Add DT bindings document for the PTXPMB CPLD MFD device.
> 
> Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt    | 76 ++++++++++++++++++++++
>  1 file changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt
> new file mode 100644
> index 0000000..cc3cbb9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-cpld.txt
> @@ -0,0 +1,76 @@
> +* Device tree bindings for Juniper's PTXPMB CPLD FPGA MFD driver
> +
> +The device supports a number I2C muxes, hardware watchdog and a gpio block.
> +Those devices bindings are described in the jnx-i2c-mux-ptxpmb-cpld,
> +jnx-ptxpmb-wdt and jnx-gpio-ptxpmb-cpld documents.
> +
> +Required properties:
> +
> +- compatible:		"jnx,ptxpmb-cpld", "jnx,ngpmb-bcpld". They differ

bcpld? looks like a typo?

> +			in the i2c-mux blocks.
> +
> +- reg:			contains offset/length value for device state control
> +			registers space.
> +
> +Optional properties:
> +
> +- interrupts:		The interrupt line(s) the /IRQ signal(s) for the device is
> +			connected to.
> +
> +- interrupt-parent:	The parent interrupt controller.
> +
> +Example:
> +
> +cpld@0,0 {

What bus is this on? If just simple-bus, then just '...@0'

> +	compatible = "jnx,ptxpmb-cpld";
> +	reg = <0x0 0 0x10000>;
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html