On 2016-10-07 17:21, Pantelis Antoniou wrote: > From: Georgi Vlaev <gvlaev@xxxxxxxxxxx> > > Add binding document for the i2c mux driver of Juniper's I2CS FPGA. > > Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx> > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx> > --- > .../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > > diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > new file mode 100644 > index 0000000..03d917f > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > @@ -0,0 +1,27 @@ > +* Juniper I2C Mux on I2CS > + > + I2C mux driver for switching the RE access to the FPC i2c bus. > + Compatible with the FPC variant of the I2CS. > + > +Required properties: > + > + - compatible: "jnx,i2cs-mux-i2cs". jnx,i2c-mux-i2cs > + > +The following required properties are defined externally: > + > + - Standard I2C mux properties. See i2c-mux.txt in this directory. To accommodate changes pending for 4.9, change "mux" to "gate" in this line... > + - I2C child bus nodes. See i2c-mux.txt in this directory. This line is wrong since the child nodes themselves are optional in i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt). > + > +Example: > + > +fpc0_mux { > + compatible = "jnx,i2c-mux-i2cs"; > + #address-cells = <1>; > + #size-cells = <0>; ...drop these two... > + > + fpc0i2c0: i2c@0 { ...change i2c@0 to i2c-gate... > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; ...and drop reg. Cheers, Peter > + }; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html