[PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Using "->" to indicate range is not too common, switch to ".."

Signed-off-by: Pavel Machek <pavel@xxxxxx>

--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -90,7 +90,7 @@ Some terms used in this document:-
                    operating parameters and is specified in the regulator
                    datasheet. i.e.
 
-                     - voltage output is in the range 800mV -> 3500mV.
+                     - voltage output is in the range 800mV .. 3500mV.
                      - regulator current output limit is 20mA @ 5V but is
                        10mA @ 10V.
 
@@ -99,8 +99,8 @@ Some terms used in this document:-
                    power domain to a particular power range. i.e.
 
                      - Domain-1 voltage is 3300mV
-                     - Domain-2 voltage is 1400mV -> 1600mV
-                     - Domain-3 current limit is 0mA -> 20mA.
+                     - Domain-2 voltage is 1400mV .. 1600mV
+                     - Domain-3 current limit is 0mA .. 20mA.
 
                    Consumer Level: This is defined by consumer drivers
                    dynamically setting voltage or current limit levels.

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux