On Thu, Sep 8, 2016 at 3:41 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Thu, Sep 08, 2016 at 12:32:48AM +0800, Chen-Yu Tsai wrote:
>> On Wed, Sep 7, 2016 at 10:53 PM, Maxime Ripard
>> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
>> > From: Mylène Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
>> >
>> > The GR8 is an SoC made by Nextthing loosely based on the sun5i family.
>> >
>> > Since it's not clear yet what we can factor out and merge with the A10s and
>> > A13 support, let's keep it out of the sun5i.dtsi include tree. We will
>> > figure out what can be shared when things settle down.
>> >
>> > Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
>> > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
>> > ---
>> > arch/arm/boot/dts/ntc-gr8.dtsi | 1080 ++++++++++++++++++++++++++++++++++++++++
>> > 1 file changed, 1080 insertions(+)
>> > create mode 100644 arch/arm/boot/dts/ntc-gr8.dtsi
>> >
>> > diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/ntc-gr8.dtsi
>> > new file mode 100644
>> > index 000000000000..d21cfa3f3c14
>> > --- /dev/null
>> > +++ b/arch/arm/boot/dts/ntc-gr8.dtsi
>> > @@ -0,0 +1,1080 @@
>>
>> [...]
>>
>> > + pll3x2: pll3x2_clk {
>> > + compatible = "fixed-factor-clock";
>>
>> I think you want "allwinner,sun4i-a10-pll3-2x-clk"?
>
> Indeed.
>
>> > + tcon_ch1_clk: clk@01c2012c {
>> > + #clock-cells = <0>;
>> > + compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
>> > + reg = <0x01c2012c 0x4>;
>> > + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
>> > + clock-output-names = "tcon-ch1-sclk";
>> > + };
>>
>> Nit: Is there a ve_clk we could add?
>
> I don't know. No one uses it, and the next item on my todo list is to
> move the sun5i SoCs to sunxi-ng, so it seems a bit useless to add that
> one.
Makes sense. Thanks!
ChenYu
>
>>
>> [...]
>>
>> > + pio: pinctrl@01c20800 {
>> > + compatible = "nextthing,gr8-pinctrl";
>> > + reg = <0x01c20800 0x400>;
>> > + interrupts = <28>;
>> > + clocks = <&apb0_gates 5>;
>> > + gpio-controller;
>> > + interrupt-controller;
>> > + #interrupt-cells = <3>;
>> > + #gpio-cells = <3>;
>> > +
>> > + i2c0_pins_a: i2c0@0 {
>> > + allwinner,pins = "PB0", "PB1";
>> > + allwinner,function = "i2c0";
>> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>> > +
>> > + i2c1_pins_a: i2c1@0 {
>> > + allwinner,pins = "PB15", "PB16";
>> > + allwinner,function = "i2c1";
>> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>> > +
>> > + i2c2_pins_a: i2c2@0 {
>> > + allwinner,pins = "PB17", "PB18";
>> > + allwinner,function = "i2c2";
>> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>> > +
>> > + i2s0_pins_a: i2s0@0 {
>> > + allwinner,pins = "PB5", "PB6", "PB7", "PB8", "PB9";
>> > + allwinner,function = "i2s0";
>> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>>
>> You may want to split out the MCLK pin. Some codecs don't need it, and the
>> pin can be allocated for other uses.
>
> ACK.
>
>>
>> > +
>> > + ir0_rx_pins_a: ir0@0 {
>> > + allwinner,pins = "PB4";
>> > + allwinner,function = "ir0";
>> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>> > +
>> > + lcd_rgb666_pins: lcd_rgb666@0 {
>> > + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
>> > + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
>> > + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
>> > + "PD24", "PD25", "PD26", "PD27";
>> > + allwinner,function = "lcd0";
>> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>> > +
>> > + mmc0_pins_a: mmc0@0 {
>> > + allwinner,pins = "PF0", "PF1", "PF2", "PF3",
>> > + "PF4", "PF5";
>> > + allwinner,function = "mmc0";
>> > + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
>> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> > + };
>> > +
>> > + nand_pins_a: nand_base0@0 {
>> > + allwinner,pins = "PC0", "PC1", "PC2",
>> > + "PC5", "PC8", "PC9", "PC10",
>> > + "PC11", "PC12", "PC13", "PC14",
>> > + "PC15";
>> > + allwinner,function = "nand0";
>> > + allwinner,drive = <0>;
>> > + allwinner,pull = <0>;
>>
>> Macros for the nand pins?
>
> Indeed.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Date: Wed, 14 Sep 2016 10:48:01 +0800
- In-reply-to: <20160908074155.GH8913@lukather>
- References: <20160907145400.27192-1-maxime.ripard@free-electrons.com> <20160907145400.27192-4-maxime.ripard@free-electrons.com> <CAGb2v67WLn6Sv9ie9CrA52zHf0xbwVd7YrJ_2pF3UW8LmxVvRQ@mail.gmail.com> <20160908074155.GH8913@lukather>
- References:
- [PATCH v2 0/4] Introduce NextThing GR8 support
- From: Maxime Ripard
- [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- From: Maxime Ripard
- Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- From: Chen-Yu Tsai
- Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- From: Maxime Ripard
- [PATCH v2 0/4] Introduce NextThing GR8 support
- Prev by Date: Re: [PATCH] driver: base: pinctrl: return error from pinctrl_bind_pins()
- Next by Date: Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- Previous by thread: Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- Next by thread: Re: [PATCH v2 3/4] ARM: dts: Add NextThing GR8 dtsi
- Index(es):
 |