[PATCH v2 0/2] add support for the SDIO pins on GXBB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds the pins for the SDIO controller (sd_emmc_a) found on
Meson GXBB SoCs.

Changes since v1:
- add the missing SDIO interrupt pin:
  The initial pinctrl patch was already applied to linux-pinctrl's
  for-next branch, so patch 1 applies on top of the already existing
  patch (both can be squashed if needed).
  The dts patch was not applied anywhere yet, so patch 2 contains a
  fixed version of the patch (provided by Neil Armstrong - thanks!).


Martin Blumenstingl (1):
  pinctrl: meson-gxbb: add the missing SDIO interrupt pin

Neil Armstrong (1):
  ARM64: dts: meson-gxbb: add the SDIO pins

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 19 +++++++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c  |  4 +++-
 2 files changed, 22 insertions(+), 1 deletion(-)

-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux