Since commit 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") the driver starts to use gpio/pinctrl to do i2c bus recovery. But pinctrl is not always available for platforms using this driver such as ls1021a and ls1043a, and the device tree binding also mentioned this gpio based recovery mechanism as optional. The patch make it really optional that the probe function won't bailout when pinctrl is not available and it won't try to register recovery functions if pinctrl is NULL when the PINCTRL is not enabled at all. Signed-off-by: Li Yang <leoyang.li@xxxxxxx> Cc: Gao Pan <pandy.gao@xxxxxxx> Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- I lost track of the origin patch, but problem really shows up in testing when PINCTRL is enabled in kernel config. So here is the updated patch. v4: Remove the use of IS_ERR_OR_NULL Move the condition judgement to i2c_imx_init_recovery_info() Change the timing of recovery initialization to be after bus registration v3: Rebased to Wolfram's for-next branch Added acked-by from Linus Walleij Update to use new nxp email addresses due to company merge drivers/i2c/busses/i2c-imx.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 1844bc9..00ac4c2 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -989,6 +989,15 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, { struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; + /* if pinctrl is not supported on the system */ + if (IS_ERR(i2c_imx->pinctrl)) + i2c_imx->pinctrl = NULL; + + if (!i2c_imx->pinctrl) { + dev_info(&i2c_imx->adapter.dev, "can't get pinctrl, bus recovery not supported\n"); + return; + } + i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl, PINCTRL_STATE_DEFAULT); i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl, @@ -1081,8 +1090,11 @@ static int i2c_imx_probe(struct platform_device *pdev) return ret; } + /* optional bus recovery feature through pinctrl */ i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); - if (IS_ERR(i2c_imx->pinctrl)) { + /* bailout on -ENOMEM or -EPROBE_DEFER, continue for other errors */ + if (PTR_ERR(i2c_imx->pinctrl) == -ENOMEM || + PTR_ERR(i2c_imx->pinctrl) == -EPROBE_DEFER) { ret = PTR_ERR(i2c_imx->pinctrl); goto clk_disable; } @@ -1125,8 +1137,6 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx, IMX_I2C_I2CR); imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); - i2c_imx_init_recovery_info(i2c_imx, pdev); - /* Add I2C adapter */ ret = i2c_add_numbered_adapter(&i2c_imx->adapter); if (ret < 0) { @@ -1146,6 +1156,9 @@ static int i2c_imx_probe(struct platform_device *pdev) /* Init DMA config if supported */ i2c_imx_dma_request(i2c_imx, phy_addr); + /* Init bus recovery if supported */ + i2c_imx_init_recovery_info(i2c_imx, pdev); + return 0; /* Return OK */ rpm_disable: -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html