On Fri, Jul 15, 2016 at 12:37:05PM +0530, njaigane@xxxxxxxxxxxxxx wrote: > From: Jaiganesh Narayanan <njaigane@xxxxxxxxxxxxxx> > > This patch adds the tlmm/pinctrl support for IPQ4019 ASoC. > > Signed-off-by: Jaiganesh Narayanan <njaigane@xxxxxxxxxxxxxx> > --- > drivers/pinctrl/qcom/pinctrl-ipq4019.c | 116 +++++++++++++++++++++++++-------- > 1 file changed, 88 insertions(+), 28 deletions(-) > > diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c > index b68ae42..bc22597 100644 > --- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c > +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c > @@ -1,5 +1,5 @@ > /* > - * Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 and > @@ -283,6 +283,18 @@ enum ipq4019_functions { > qca_mux_blsp_uart0, > qca_mux_blsp_spi1, > qca_mux_blsp_spi0, > + qca_mux_i2s_rx_mclk, > + qca_mux_i2s_rx_bclk, > + qca_mux_i2s_rx_fsync, > + qca_mux_i2s_rxd, > + qca_mux_i2s_tx_mclk, > + qca_mux_i2s_tx_bclk, > + qca_mux_i2s_tx_fsync, > + qca_mux_i2s_txd1, > + qca_mux_i2s_txd2, > + qca_mux_i2s_txd3, > + qca_mux_i2s_spdif_out, > + qca_mux_i2s_spdif_in, You'll also need to add all of these to the Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt I was also going to suggest just using qca_i2s and having a single function, but it seems like there is at least 1 pin that supports more than one i2s mode. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html