Re: [PATCH v4] gpio: add Intel WhiskeyCove GPIO driver

[Bin Gao <bin.gao@xxxxxxxxxxxxxxx>]

On Wed, Jul 06, 2016 at 10:57:19AM +0200, Linus Walleij wrote:
> > +       gpiochip_irqchip_add(&wg->chip, &wcove_irqchip, 0,
> > +                            handle_simple_irq, IRQ_TYPE_NONE);
> 
> Reexamine the use of handle_simple_irq() here. We have two kinds of
> irq hardware: those with one register for ACKing and reading the status
> of an IRQ, and those with two registers for it: one where you ACK the
> IRQ (so it can immediately re-trigger) and one to read the status of
> whether it happened. Sometimes different handling is needed for
> levek and edge IRQs even (c.f. gpio-pl061.c).
> 
> Only the hardware with just one register for both things should use
> handle_simple_irq(). This seems to be the case here but I want you
> to verify.

Yes, our case is handle_simple_irq(), not handle_edge_irq(), handle_level_irq() or
handle_fasteoi_irq(), etc. because there is no ACK mechanism inside the
GPIO controller's interrupt logic - all we need to do is read the status
register to get the status and write-to-clear the status register so that
a new interrupt can be triggered, i.e. there is only one register for both.

> 
> Yours,
> Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html