The function selection bitfield is not always 3 bits wide. Sometimes it is 4 bits wide. Let's use the npins struct member to determine how many bits wide the function selection bitfield is so we clear the correct amount of bits in the register while remuxing the pins. Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx> --- drivers/pinctrl/qcom/pinctrl-msm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 1a44e1d03390..51c42d746883 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -29,6 +29,7 @@ #include <linux/spinlock.h> #include <linux/reboot.h> #include <linux/pm.h> +#include <linux/log2.h> #include "../core.h" #include "../pinconf.h" @@ -138,10 +139,11 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev, struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); const struct msm_pingroup *g; unsigned long flags; - u32 val; + u32 val, mask; int i; g = &pctrl->soc->groups[group]; + mask = GENMASK(g->mux_bit + order_base_2(g->nfuncs) - 1, g->mux_bit); for (i = 0; i < g->nfuncs; i++) { if (g->funcs[i] == function) @@ -154,7 +156,7 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev, spin_lock_irqsave(&pctrl->lock, flags); val = readl(pctrl->regs + g->ctl_reg); - val &= ~(0x7 << g->mux_bit); + val &= mask; val |= i << g->mux_bit; writel(val, pctrl->regs + g->ctl_reg); -- 2.9.0.rc2.8.ga28705d -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html