Re: [PATCHv2 3/8] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip

[Lee Jones <lee.jones@xxxxxxxxxx>]

On Thu, 02 Jun 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:

> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> 
> Add support for the Altera Arria10 Development Kit System Resource
> chip which is implemented using a MAX5 as a external gpio extender
> with the regmap framework over a SPI bus.
> 
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v2	Remove hwmon from description.
> 	Change Altera to Intel in copyright header.
> 	Remove Copyright and Author from attribution
> 	Use devm_mfd_add_devices() and remove .remove()
> 	Fix Kconfig spacing.
> ---
>  drivers/mfd/Kconfig              |   11 +++
>  drivers/mfd/Makefile             |    2 +
>  drivers/mfd/altera-a10sr.c       |  169 ++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/altera-a10sr.h |   85 +++++++++++++++++++
>  4 files changed, 267 insertions(+)
>  create mode 100644 drivers/mfd/altera-a10sr.c
>  create mode 100644 include/linux/mfd/altera-a10sr.h

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601..00ec129 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,17 @@ config MFD_CS5535
>  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
>            necessary for using the board's GPIO and MFGPT functionality.
>  
> +config MFD_ALTERA_A10SR
> +	bool "Altera Arria10 DevKit System Resource chip"
> +	depends on ARCH_SOCFPGA && SPI_MASTER=y && OF
> +	select REGMAP_SPI
> +	select MFD_CORE
> +	help
> +	  Support for the Altera Arria10 DevKit MAX5 System Resource chip
> +	  using the SPI interface. This driver provides common support for
> +	  accessing the external gpio extender (LEDs & buttons) and
> +	  power supply alarms (hwmon).
> +
>  config MFD_ACT8945A
>  	tristate "Active-semi ACT8945A"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 42a66e1..2ba3ba3 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -205,3 +205,5 @@ intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
>  intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
>  obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
>  obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
> +
> +obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
> diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
> new file mode 100644
> index 0000000..c05aa4f
> --- /dev/null
> +++ b/drivers/mfd/altera-a10sr.c
> @@ -0,0 +1,169 @@
> +/*
> + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + *
> + * SPI access for Altera Arria10 MAX5 System Resource Chip
> + *
> + * Adapted from DA9052
> + */
> +
> +#include <linux/mfd/altera-a10sr.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/spi/spi.h>
> +
> +static const struct mfd_cell altr_a10sr_subdev_info[] = {
> +	{
> +		.name = "altr_a10sr_gpio",
> +		.of_compatible = "altr,a10sr-gpio",
> +	},
> +};
> +
> +static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case ALTR_A10SR_VERSION_READ:
> +	case ALTR_A10SR_LED_REG:
> +	case ALTR_A10SR_PBDSW_REG:
> +	case ALTR_A10SR_PBDSW_IRQ_REG:
> +	case ALTR_A10SR_PWR_GOOD1_REG:
> +	case ALTR_A10SR_PWR_GOOD2_REG:
> +	case ALTR_A10SR_PWR_GOOD3_REG:
> +	case ALTR_A10SR_FMCAB_REG:
> +	case ALTR_A10SR_HPS_RST_REG:
> +	case ALTR_A10SR_USB_QSPI_REG:
> +	case ALTR_A10SR_SFPA_REG:
> +	case ALTR_A10SR_SFPB_REG:
> +	case ALTR_A10SR_I2C_M_REG:
> +	case ALTR_A10SR_WARM_RST_REG:
> +	case ALTR_A10SR_WR_KEY_REG:
> +	case ALTR_A10SR_PMBUS_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case ALTR_A10SR_LED_REG:
> +	case ALTR_A10SR_PBDSW_IRQ_REG:
> +	case ALTR_A10SR_FMCAB_REG:
> +	case ALTR_A10SR_HPS_RST_REG:
> +	case ALTR_A10SR_USB_QSPI_REG:
> +	case ALTR_A10SR_SFPA_REG:
> +	case ALTR_A10SR_SFPB_REG:
> +	case ALTR_A10SR_WARM_RST_REG:
> +	case ALTR_A10SR_WR_KEY_REG:
> +	case ALTR_A10SR_PMBUS_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case ALTR_A10SR_PBDSW_REG:
> +	case ALTR_A10SR_PBDSW_IRQ_REG:
> +	case ALTR_A10SR_PWR_GOOD1_REG:
> +	case ALTR_A10SR_PWR_GOOD2_REG:
> +	case ALTR_A10SR_PWR_GOOD3_REG:
> +	case ALTR_A10SR_HPS_RST_REG:
> +	case ALTR_A10SR_I2C_M_REG:
> +	case ALTR_A10SR_WARM_RST_REG:
> +	case ALTR_A10SR_WR_KEY_REG:
> +	case ALTR_A10SR_PMBUS_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +const struct regmap_config altr_a10sr_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.cache_type = REGCACHE_NONE,
> +
> +	.use_single_rw = true,
> +	.read_flag_mask = 1,
> +	.write_flag_mask = 0,
> +
> +	.max_register = ALTR_A10SR_WR_KEY_REG,
> +	.readable_reg = altr_a10sr_reg_readable,
> +	.writeable_reg = altr_a10sr_reg_writeable,
> +	.volatile_reg = altr_a10sr_reg_volatile,
> +
> +};
> +
> +static int altr_a10sr_spi_probe(struct spi_device *spi)
> +{
> +	int ret;
> +	struct altr_a10sr *a10sr;
> +
> +	a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr),
> +			     GFP_KERNEL);
> +	if (!a10sr)
> +		return -ENOMEM;
> +
> +	spi->mode = SPI_MODE_3;
> +	spi->bits_per_word = 8;
> +	spi_setup(spi);
> +
> +	a10sr->dev = &spi->dev;
> +
> +	spi_set_drvdata(spi, a10sr);
> +
> +	a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config);
> +	if (IS_ERR(a10sr->regmap)) {
> +		ret = PTR_ERR(a10sr->regmap);
> +		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	ret = devm_mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO,
> +				   altr_a10sr_subdev_info,
> +				   ARRAY_SIZE(altr_a10sr_subdev_info),
> +				   NULL, 0, NULL);
> +	if (ret)
> +		dev_err(a10sr->dev, "Failed to register sub-devices: %d\n",
> +			ret);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id altr_a10sr_spi_of_match[] = {
> +	{ .compatible = "altr,a10sr" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match);
> +
> +static struct spi_driver altr_a10sr_spi_driver = {
> +	.probe = altr_a10sr_spi_probe,
> +	.driver = {
> +		.name = "altr_a10sr",
> +		.of_match_table = of_match_ptr(altr_a10sr_spi_of_match),
> +	},
> +};
> +
> +module_spi_driver(altr_a10sr_spi_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver");
> diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h
> new file mode 100644
> index 0000000..45a5e6e
> --- /dev/null
> +++ b/include/linux/mfd/altera-a10sr.h
> @@ -0,0 +1,85 @@
> +/*
> + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Declarations for Altera Arria10 MAX5 System Resource Chip
> + *
> + * Adapted from DA9052
> + */
> +
> +#ifndef __MFD_ALTERA_A10SR_H
> +#define __MFD_ALTERA_A10SR_H
> +
> +#include <linux/completion.h>
> +#include <linux/list.h>
> +#include <linux/mfd/core.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +/* Write registers are always on even addresses */
> +#define  WRITE_REG_MASK              0xFE
> +/* Odd registers are always on odd addresses */
> +#define  READ_REG_MASK               0x01
> +
> +#define ALTR_A10SR_BITS_PER_REGISTER  8
> +/*
> + * To find the correct register, we divide the input GPIO by
> + * the number of GPIO in each register. We then need to multiply
> + * by 2 because the reads are at odd addresses.
> + */
> +#define ALTR_A10SR_REG_OFFSET(X)     (((X) / ALTR_A10SR_BITS_PER_REGISTER) << 1)
> +#define ALTR_A10SR_REG_BIT(X)        ((X) % ALTR_A10SR_BITS_PER_REGISTER)
> +#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y))
> +#define ALTR_A10SR_REG_BIT_MASK(X)   (1 << ALTR_A10SR_REG_BIT(X))
> +
> +/* Arria10 System Controller Register Defines */
> +#define ALTR_A10SR_NOP                0x00    /* No Change */
> +#define ALTR_A10SR_VERSION_READ       0x00    /* MAX5 Version Read */
> +
> +#define ALTR_A10SR_LED_REG            0x02    /* LED - Upper 4 bits */
> +/* LED register Bit Definitions */
> +#define ALTR_A10SR_LED_VALID_SHIFT        4       /* LED - Upper 4 bits valid */
> +#define ALTR_A10SR_OUT_VALID_RANGE_LO     ALTR_A10SR_LED_VALID_SHIFT
> +#define ALTR_A10SR_OUT_VALID_RANGE_HI     7
> +
> +#define ALTR_A10SR_PBDSW_REG          0x04    /* PB & DIP SW - Input only */
> +#define ALTR_A10SR_PBDSW_IRQ_REG      0x06    /* PB & DIP SW Flag Clear */
> +/* Pushbutton & DIP Switch Bit Definitions */
> +#define ALTR_A10SR_IN_VALID_RANGE_LO      8
> +#define ALTR_A10SR_IN_VALID_RANGE_HI      15
> +
> +#define ALTR_A10SR_PWR_GOOD1_REG      0x08    /* Power Good1 Read */
> +#define ALTR_A10SR_PWR_GOOD2_REG      0x0A    /* Power Good2 Read */
> +#define ALTR_A10SR_PWR_GOOD3_REG      0x0C    /* Power Good3 Read */
> +#define ALTR_A10SR_FMCAB_REG          0x0E    /* FMCA/B & PCIe Pwr Enable */
> +#define ALTR_A10SR_HPS_RST_REG        0x10    /* HPS Reset */
> +#define ALTR_A10SR_USB_QSPI_REG       0x12    /* USB, BQSPI, FILE Reset */
> +#define ALTR_A10SR_SFPA_REG           0x14    /* SFPA Control Reg */
> +#define ALTR_A10SR_SFPB_REG           0x16    /* SFPB Control Reg */
> +#define ALTR_A10SR_I2C_M_REG          0x18    /* I2C Master Select */
> +#define ALTR_A10SR_WARM_RST_REG       0x1A    /* HPS Warm Reset */
> +#define ALTR_A10SR_WR_KEY_REG         0x1C    /* HPS Warm Reset Key */
> +#define ALTR_A10SR_PMBUS_REG          0x1E    /* HPS PM Bus */
> +
> +/**
> + * struct altr_a10sr - Altera Max5 MFD device private data structure
> + * @dev:  : this device
> + * @regmap: the regmap assigned to the parent device.
> + */
> +struct altr_a10sr {
> +	struct device *dev;
> +	struct regmap *regmap;
> +};
> +
> +#endif /* __MFD_ALTERA_A10SR_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html