Convert the i.MX FEC driver and DT files to use the GPIOD API
which automatically handles GPIO polarity.
Signed-off-by: George G. Davis <george_davis@xxxxxxxxxx>
---
Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++-----
arch/arm/boot/dts/imx25-karo-tx25.dts | 3 ++-
arch/arm/boot/dts/imx25-pdk.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10037.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10049.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10057.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10058.dts | 2 +-
arch/arm/boot/dts/imx28-evk.dts | 2 +-
arch/arm/boot/dts/imx28-m28cu3.dts | 2 +-
arch/arm/boot/dts/imx50-evk.dts | 3 ++-
arch/arm/boot/dts/imx53-mba53.dts | 2 +-
arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
arch/arm/boot/dts/imx53-smd.dts | 2 +-
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 2 +-
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +-
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +-
arch/arm/boot/dts/imx6q-evi.dts | 2 +-
arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 +-
drivers/net/ethernet/freescale/fec_main.c | 19 +++++--------------
22 files changed, 29 insertions(+), 39 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index b037a9d..3da6a4a 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -12,9 +12,6 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
-- phy-reset-active-high : If present then the reset sequence using the GPIO
- specified in the "phy-reset-gpios" property is reversed (H=reset state,
- L=operation state).
- phy-supply : regulator that powers the Ethernet PHY.
- phy-handle : phandle to the PHY device connected to this device.
- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
@@ -39,7 +36,7 @@ ethernet@83fec000 {
reg = <0x83fec000 0x4000>;
interrupts = <87>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <®_fec_supply>;
};
@@ -51,7 +48,7 @@ ethernet@83fec000 {
reg = <0x83fec000 0x4000>;
interrupts = <87>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <®_fec_supply>;
phy-handle = <ðphy>;
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index 9b31faa..e04272e 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -10,6 +10,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx25.dtsi"
/ {
@@ -97,7 +98,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
- phy-reset-gpios = <&gpio3 7 0>;
+ phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
phy-mode = "rmii";
phy-supply = <®_fec_phy>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 9351296..b690ce1 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -125,7 +125,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-supply = <®_fec_3v3>;
- phy-reset-gpios = <&gpio4 8 0>;
+ phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index e5beaa5..3d13b32 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -64,7 +64,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a
&mac0_pins_cfa10037>;
- phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index ef944b6..a78cc62 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -327,7 +327,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a
&mac0_pins_cfa10049>;
- phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 7a80bd6..c606791 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -162,7 +162,7 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index f5c6dce..70c7bb4 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -129,7 +129,7 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index e3ef94ac..98b8eb3 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -262,7 +262,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-supply = <®_fec_3v3>;
- phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 2df63be..54cd558 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -188,7 +188,7 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 27d763c..54d20e6 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -12,6 +12,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx50.dtsi"
/ {
@@ -54,7 +55,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- phy-reset-gpios = <&gpio4 12 0>;
+ phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 2e44d2a..df705ba 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -195,7 +195,7 @@
};
&fec {
- phy-reset-gpios = <&gpio7 6 0>;
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index c05e7cf..d0d273d 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -344,7 +344,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 542ab9e..9205e32 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -274,6 +274,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
index ba689fb..774f041 100644
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -138,7 +138,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- phy-reset-gpios = <&gpio4 2 0>;
+ phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index bfbed52..5ea616a 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -94,7 +94,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 31 0>;
+ phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 364578d..55b639f 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -119,7 +119,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 25 0>;
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-supply = <&vgen2_1v2_eth>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 4fa56019..a18f67f 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -138,7 +138,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 25 0>;
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index 469ef58..dbe3552 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -46,7 +46,7 @@
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
phy-mode = "rgmii";
phy-reset-duration = <2>;
- phy-reset-gpios = <&gpio4 15 0>;
+ phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 73915db..b3853f4 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -272,7 +272,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 27 0>;
+ phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
txen-skew-ps = <0>;
txc-skew-ps = <3000>;
rxdv-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 5248e7bd..0834e31 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -179,7 +179,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 25 0>;
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 8e7c40e..1855799 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -208,7 +208,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 29 0>;
+ phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index ca2cccc..f08b922 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3167,8 +3167,7 @@ static int fec_enet_init(struct net_device *ndev)
#ifdef CONFIG_OF
static void fec_reset_phy(struct platform_device *pdev)
{
- int err, phy_reset;
- bool active_high = false;
+ struct gpio_desc *phy_reset;
int msec = 1;
struct device_node *np = pdev->dev.of_node;
@@ -3180,21 +3179,13 @@ static void fec_reset_phy(struct platform_device *pdev)
if (msec > 1000)
msec = 1;
- phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
- if (!gpio_is_valid(phy_reset))
+ phy_reset = devm_gpiod_get_optional(&pdev->dev, "phy-reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(phy_reset))
return;
- active_high = of_property_read_bool(np, "phy-reset-active-high");
-
- err = devm_gpio_request_one(&pdev->dev, phy_reset,
- active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "phy-reset");
- if (err) {
- dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
- return;
- }
msleep(msec);
- gpio_set_value_cansleep(phy_reset, !active_high);
+ gpiod_set_value(phy_reset, 0);
}
#else /* CONFIG_OF */
static void fec_reset_phy(struct platform_device *pdev)
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
- From: "George G. Davis" <george_davis@xxxxxxxxxx>
- Date: Tue, 31 May 2016 13:17:51 -0400
- Follow-Ups:
- Re: [PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
- From: Uwe Kleine-König
- Re: [PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
- From: Fabio Estevam
- Re: [PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
- Prev by Date: Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
- Next by Date: Re: [PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
- Previous by thread: [PATCH v1 1/1] gpio: pca953x: remove redundant assignments
- Next by thread: Re: [PATCH] net: fec: dt: convert phy-reset-gpios to use GPIOD API
- Index(es):
 |