Re: [PATCH 6/6] pinctrl: mt8173: set GPIO16 to usb iddig mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2016-05-11 at 19:09 -0700, Hongzhou Yang wrote:
> On Thu, 2016-05-12 at 09:41 +0800, chunfeng yun wrote:
> > Hi,
> > 
> > On Wed, 2016-05-11 at 11:32 -0700, Hongzhou Yang wrote:
> > > On Wed, 2016-05-11 at 13:56 +0200, Linus Walleij wrote:
> > > > On Tue, May 10, 2016 at 10:23 AM, Chunfeng Yun
> > > > <chunfeng.yun@xxxxxxxxxxxx> wrote:
> > > > 
> > > > > the default mode of GPIO16 pin is gpio, when set EINT16 to
> > > > > IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
> > > > > fixed when set its default mode as usb iddig.
> > > > >
> > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > > > 
> > > 
> > > Chunfeng, GPIO16 can be used as EINT16 mode, but the pinmux should be 0.
> > > If you want to set its default mode to iddig, you should set it in dts.
> > > 
> > I set it in DTS, but it didn't work, because when usb driver requested
> > IRQ, pinmux was switched back to default mode set by
> > MTK_EINT_FUNCTION().
> > 
> 
> After confirmed, there are something wrong with data sheet and pinmux
> table, and GPIO16 can only receive interrupt by mode 1. So
> 
> Acked-by: Hongzhou Yang <hongzhou.yang@xxxxxxxxxxxx>
> 

Linus,

We find there are some other pins still have the same problem, so please
hold on it. Sorry for so much noise.

Thanks,
Hongzhou

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux