On Monday 02 May 2016 08:37 PM, Rhyland Klein wrote:
On 5/2/2016 10:28 AM, Laxman Dewangan wrote:
NVIDIA's Tegra210 support the park bit to make pinmux configuration
enable/disable. If parked bit is 1 then configuration does not apply
and if it is 0 then pinmux configuration applies. This is to support
to avoid any glitch in pinmux configurations.
The parked bit is part of mux register and mux bank and hence it is
not required to have member for the parked_reg and parked bank very
similar to other bit field of the same register.
Remove the need of the parked register and parked bank and get whether
parked function supported or not by parked_bit.
This is to make the parked bit handling same as other fields of mux
registers.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
drivers/pinctrl/tegra/pinctrl-tegra.c | 8 ++++----
drivers/pinctrl/tegra/pinctrl-tegra.h | 6 +-----
drivers/pinctrl/tegra/pinctrl-tegra114.c | 4 ++--
drivers/pinctrl/tegra/pinctrl-tegra124.c | 4 ++--
drivers/pinctrl/tegra/pinctrl-tegra20.c | 4 ++--
drivers/pinctrl/tegra/pinctrl-tegra210.c | 4 +---
drivers/pinctrl/tegra/pinctrl-tegra30.c | 4 ++--
7 files changed, 14 insertions(+), 20 deletions(-)
These drivers are generated (with the exception of Tegra20) by the
tegra-pinmux-scripts hosted at :
https://github.com/NVIDIA/tegra-pinmux-scripts.git. Did you generate a
patch there so that the changes to pinctrl-tegra[114|124|210|30].c are
consistent there? If not you probably should.
No, this is manual editing. Let me create patch on script to generate
pinctrl-tegra[114|124|210|30].c as what this patch created manually.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
