[PATCH v2 0/2] pinmux support for Broadcom NS2 SoC

[Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx>]

This patchset contains the pinmux support for the Broadcom's
Northstar 2 (NS2) SoC.

The first patch provides the driver details and the second patch contains
the enable method. The documentation details patch is already merged.

This patch set has been tested on NS2 bcm958712K board.
This patch set is based on v4.6.0-rc1 and is available from github
repo: https://github.com/Broadcom/arm64-linux.git
branch: ns2-pinmux-v2

Changes since v1:
 removed module macros in the file as suggested by Linus

Yendapally Reddy Dhananjaya Reddy (2):
  pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC
  ARM: dts: enable pinctrl for Broadcom NS2 SoC

 arch/arm64/boot/dts/broadcom/ns2-svk.dts |    9 +
 arch/arm64/boot/dts/broadcom/ns2.dtsi    |    7 +
 drivers/pinctrl/bcm/Kconfig              |   13 +
 drivers/pinctrl/bcm/Makefile             |    1 +
 drivers/pinctrl/bcm/pinctrl-ns2-mux.c    | 1117 ++++++++++++++++++++++++++++++
 5 files changed, 1147 insertions(+)
 create mode 100644 drivers/pinctrl/bcm/pinctrl-ns2-mux.c

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html