This patch integrates the Cirrus' clps711x driver into the gpio-mmio framework. Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx> --- drivers/gpio/Kconfig | 14 +++---- drivers/gpio/Makefile | 2 +- drivers/gpio/gpio-clps711x.c | 84 ++++++++++++++--------------------------- drivers/gpio/gpio-mmio-compat.h | 11 ++++++ drivers/gpio/gpio-mmio.c | 1 + 5 files changed, 48 insertions(+), 64 deletions(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d1f124e..ff9ac65 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -152,13 +152,6 @@ config GPIO_BRCMSTB help Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. -config GPIO_CLPS711X - tristate "CLPS711X GPIO support" - depends on ARCH_CLPS711X || COMPILE_TEST - select GPIO_GENERIC - help - Say yes here to support GPIO on CLPS711X SoCs. - config GPIO_DAVINCI bool "TI Davinci/Keystone GPIO support" default y if ARCH_DAVINCI @@ -213,6 +206,13 @@ config GPIO_GENERIC_PLATFORM Say yes here to support basic platform_device memory-mapped GPIO controllers. if GPIO_GENERIC_PLATFORM +config GPIO_CLPS711X + bool "CLPS711X GPIO support" + depends on ARCH_CLPS711X || COMPILE_TEST + select GPIO_GENERIC + help + Say yes here to support GPIO on CLPS711X SoCs. + endif config GPIO_GRGPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 991598e..a1ae48f 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o # directly supported by gpio-generic gpio-generic-$(CONFIG_GPIO_GENERIC) += gpio-mmio.o +gpio-generic-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o obj-$(CONFIG_GPIO_104_DIO_48E) += gpio-104-dio-48e.o obj-$(CONFIG_GPIO_104_IDIO_16) += gpio-104-idio-16.o @@ -31,7 +32,6 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o -obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c index 5a69025..2072d0f 100644 --- a/drivers/gpio/gpio-clps711x.c +++ b/drivers/gpio/gpio-clps711x.c @@ -9,83 +9,55 @@ * (at your option) any later version. */ -#include <linux/err.h> +#include <linux/kernel.h> #include <linux/module.h> +#include <linux/err.h> +#include <linux/ioport.h> #include <linux/gpio/driver.h> #include <linux/platform_device.h> +#include "gpio-mmio-compat.h" -static int clps711x_gpio_probe(struct platform_device *pdev) +int cirrus_clps711x_parse_dt(struct platform_device *pdev, + struct bgpio_pdata *pdata, + unsigned long *flags) { struct device_node *np = pdev->dev.of_node; - void __iomem *dat, *dir; - struct gpio_chip *gc; + int id = np ? of_alias_get_id(np, "gpio") : pdev->id; struct resource *res; - int err, id = np ? of_alias_get_id(np, "gpio") : pdev->id; + struct resource nres[] = { + DEFINE_RES_MEM_NAMED(0, 1, "dat"), + DEFINE_RES_MEM_NAMED(0, 1, "dirout"), + }; if ((id < 0) || (id > 4)) return -ENODEV; - gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); - if (!gc) - return -ENOMEM; + if (id == 4) { + /* PORTE is 3 lines only */ + pdata->ngpio = 3; + } + + pdata->base = id * 8; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dat = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(dat)) - return PTR_ERR(dat); + if (!res || resource_size(res) != 0x1) + return -EINVAL; + set_resource_address(&nres[0], res->start, 0x1); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - dir = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(dir)) - return PTR_ERR(dir); + if (!res || resource_size(res) != 0x1) + return -EINVAL; + set_resource_address(&nres[1], res->start, 0x1); - switch (id) { - case 3: + if (id == 3) { /* PORTD is inverted logic for direction register */ - err = bgpio_init(gc, &pdev->dev, 1, dat, NULL, NULL, - NULL, dir, 0); - break; - default: - err = bgpio_init(gc, &pdev->dev, 1, dat, NULL, NULL, - dir, NULL, 0); - break; - } - - if (err) - return err; - - switch (id) { - case 4: - /* PORTE is 3 lines only */ - gc->ngpio = 3; - break; - default: - break; + nres[1].name = "dirin"; } - gc->base = id * 8; - gc->owner = THIS_MODULE; - platform_set_drvdata(pdev, gc); - - return devm_gpiochip_add_data(&pdev->dev, gc, NULL); + return platform_device_add_resources(pdev, nres, ARRAY_SIZE(nres)); } -static const struct of_device_id __maybe_unused clps711x_gpio_ids[] = { - { .compatible = "cirrus,clps711x-gpio" }, - { } -}; -MODULE_DEVICE_TABLE(of, clps711x_gpio_ids); - -static struct platform_driver clps711x_gpio_driver = { - .driver = { - .name = "clps711x-gpio", - .of_match_table = of_match_ptr(clps711x_gpio_ids), - }, - .probe = clps711x_gpio_probe, -}; -module_platform_driver(clps711x_gpio_driver); - -MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shiyan <shc_work@xxxxxxx>"); MODULE_DESCRIPTION("CLPS711X GPIO driver"); MODULE_ALIAS("platform:clps711x-gpio"); +MODULE_ALIAS("clps711x-gpio"); diff --git a/drivers/gpio/gpio-mmio-compat.h b/drivers/gpio/gpio-mmio-compat.h index 73c48bc..32b5510 100644 --- a/drivers/gpio/gpio-mmio-compat.h +++ b/drivers/gpio/gpio-mmio-compat.h @@ -5,6 +5,17 @@ #define ADD(_name, _func) { .compatible = _name, .data = _func } +#if IS_ENABLED(CONFIG_GPIO_CLPS711X) +int cirrus_clps711x_parse_dt(struct platform_device *pdev, + struct bgpio_pdata *pdata, + unsigned long *flags); + +#define GPIO_CLPS711X_COMPATIBLE \ + ADD("cirrus,clps711x-gpio", cirrus_clps711x_parse_dt), +#else +#define GPIO_CLPS711X_COMPATIBLE +#endif /* CONFIG_GPIO_CLPS711X */ + #undef ADD static inline void set_resource_address(struct resource *res, diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c index 4de9846..1be8cb7 100644 --- a/drivers/gpio/gpio-mmio.c +++ b/drivers/gpio/gpio-mmio.c @@ -608,6 +608,7 @@ static int bgpio_basic_mmio_parse_dt(struct platform_device *pdev, static const struct of_device_id bgpio_of_match[] = { ADD("linux,gpio-mmio", bgpio_basic_mmio_parse_dt), + GPIO_CLPS711X_COMPATIBLE { } }; -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html