Re: [PATCH 10/11] hwmon: Add Altera A10-SR power supply alarms

Guenter Roeck <linux@xxxxxxxxxxxx> · Mon, 25 Apr 2016 07:58:08 -0700

On 04/25/2016 07:41 AM, Thor Thayer wrote:


On 04/22/2016 05:24 PM, Guenter Roeck wrote:
On Fri, Apr 22, 2016 at 10:33:38AM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>

This patch adds the power supply alarms of the hwmon framework
to the Arria10 System Resource chip.

Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---

Please read and follow Documentation/hwmon/sysfs-interface
as well as Documentation/hwmon/submitting-patches. At the very least,
you are expected to document your driver, and you are expected to
use standard attribute names.


OK. I misunderstood. The standard attribute names would be power[1-*]_alarm and the binding documentation the a10sr-hwmon portion for MFD doesn't cover this.


power ? Why power ? The names suggest those are voltages.
Also not sure why those names would be in the bindings.

  drivers/hwmon/Kconfig              |    9 ++
  drivers/hwmon/Makefile             |    1 +
  drivers/hwmon/altera-a10sr-hwmon.c |  215 ++++++++++++++++++++++++++++++++++++
  3 files changed, 225 insertions(+)
  create mode 100644 drivers/hwmon/altera-a10sr-hwmon.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index ff94007..af08846 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -248,6 +248,15 @@ config SENSORS_ADT7475
        This driver can also be build as a module.  If so, the module
        will be called adt7475.

+config SENSORS_ALTERA_A10SR
+    bool "Altera Arria10 System Status"
+    depends on MFD_ALTERA_A10SR
+    help
+      If you say yes here you get support for the power ready status
+      for the Arria10's external power supplies on the Arria10 DevKit.
+      These values are read over the SPI bus from the Arria10 System
+      Resource chip.
+
  config SENSORS_ASC7621
      tristate "Andigilog aSC7621"
      depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2ef5b7c..17d72a7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SENSORS_ADT7411)    += adt7411.o
  obj-$(CONFIG_SENSORS_ADT7462)    += adt7462.o
  obj-$(CONFIG_SENSORS_ADT7470)    += adt7470.o
  obj-$(CONFIG_SENSORS_ADT7475)    += adt7475.o
+obj-$(CONFIG_SENSORS_ALTERA_A10SR) += altera-a10sr-hwmon.o
  obj-$(CONFIG_SENSORS_APPLESMC)    += applesmc.o
  obj-$(CONFIG_SENSORS_ARM_SCPI)    += scpi-hwmon.o
  obj-$(CONFIG_SENSORS_ASC7621)    += asc7621.o
diff --git a/drivers/hwmon/altera-a10sr-hwmon.c b/drivers/hwmon/altera-a10sr-hwmon.c
new file mode 100644
index 0000000..1eecc6b
--- /dev/null
+++ b/drivers/hwmon/altera-a10sr-hwmon.c
@@ -0,0 +1,215 @@
+/*
+ *  Copyright Altera Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * HW Monitor driver for  Altera Arria10 MAX5 System Resource Chip
+ * Adapted from DA9052
+ */
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/module.h>
+#include <linux/of.h>

Please list include files in alphabetic order.


OK. I thought this was in alphabetical order. I'll update this after figuring out where I was wrong.


Sorry, PBKAC on my side.

Guenter

+
+#define ALTR_A10SR_1V0_BIT_POS          ALTR_A10SR_PG1_1V0_SHIFT
+#define ALTR_A10SR_0V95_BIT_POS         ALTR_A10SR_PG1_0V95_SHIFT
+#define ALTR_A10SR_0V9_BIT_POS          ALTR_A10SR_PG1_0V9_SHIFT
+#define ALTR_A10SR_10V_BIT_POS          ALTR_A10SR_PG1_10V_SHIFT
+#define ALTR_A10SR_5V0_BIT_POS          ALTR_A10SR_PG1_5V0_SHIFT
+#define ALTR_A10SR_3V3_BIT_POS          ALTR_A10SR_PG1_3V3_SHIFT
+#define ALTR_A10SR_2V5_BIT_POS          ALTR_A10SR_PG1_2V5_SHIFT
+#define ALTR_A10SR_1V8_BIT_POS          ALTR_A10SR_PG1_1V8_SHIFT
+#define ALTR_A10SR_OP_FLAG_BIT_POS      ALTR_A10SR_PG1_OP_FLAG_SHIFT
+/* 2nd register needs an offset of 8 to get to 2nd register */
+#define ALTR_A10SR_FBC2MP_BIT_POS       (8 + ALTR_A10SR_PG2_FBC2MP_SHIFT)
+#define ALTR_A10SR_FAC2MP_BIT_POS       (8 + ALTR_A10SR_PG2_FAC2MP_SHIFT)
+#define ALTR_A10SR_FMCBVADJ_BIT_POS     (8 + ALTR_A10SR_PG2_FMCBVADJ_SHIFT)
+#define ALTR_A10SR_FMCAVADJ_BIT_POS     (8 + ALTR_A10SR_PG2_FMCAVADJ_SHIFT)
+#define ALTR_A10SR_HL_VDDQ_BIT_POS      (8 + ALTR_A10SR_PG2_HL_VDDQ_SHIFT)
+#define ALTR_A10SR_HL_VDD_BIT_POS       (8 + ALTR_A10SR_PG2_HL_VDD_SHIFT)
+#define ALTR_A10SR_HL_HPS_BIT_POS       (8 + ALTR_A10SR_PG2_HL_HPS_SHIFT)
+#define ALTR_A10SR_HPS_BIT_POS          (8 + ALTR_A10SR_PG2_HPS_SHIFT)
+/* 3rd register needs an offset of 16 to get to 3rd register */
+#define ALTR_A10SR_10V_FAIL_BIT_POS     (16 + ALTR_A10SR_PG3_10V_FAIL_SHIFT)
+#define ALTR_A10SR_FAM2C_BIT_POS        (16 + ALTR_A10SR_PG3_FAM2C_SHIFT)
+
+/**
+ * struct altr_a10sr_hwmon - Altera Max5 HWMON device private data structure
+ * @device: hwmon class.
+ * @regmap: the regmap from the parent device.
+ */
+struct altr_a10sr_hwmon {
+    struct device        *class_device;
+    struct regmap        *regmap;
+};
+
+static ssize_t altr_a10sr_read_status(struct device *dev,
+                      struct device_attribute *devattr,
+                      char *buf)
+{
+    struct altr_a10sr_hwmon *hwmon = dev_get_drvdata(dev);
+    int val, ret, index = to_sensor_dev_attr(devattr)->index;
+    int mask = ALTR_A10SR_REG_BIT_MASK(index);
+    unsigned char reg = ALTR_A10SR_PWR_GOOD1_REG +
+                ALTR_A10SR_REG_OFFSET(index);
+
+    ret = regmap_read(hwmon->regmap, reg, &val);

The pointer parameter to regmap_read() is unsigned int. I would suggest
to use the same variable type to avoid surprises.

Understood. Thanks.

+    if (ret < 0)
+        return ret;
+
+    return sprintf(buf, "%d\n", !!(~val & mask));

Are alarms all active low ?

Yes, They are actually Power Good signals (Good = high) so I'm inverting.

+}
+
+static ssize_t altr_a10sr_hwmon_show_name(struct device *dev,
+                      struct device_attribute *devattr,
+                      char *buf)
+{
+    return sprintf(buf, "altr_a10sr\n");
+}
+
+/* First Power Good Register Bits */
+static SENSOR_DEVICE_ATTR(1v0_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_1V0_BIT_POS);
+static SENSOR_DEVICE_ATTR(0v95_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_0V95_BIT_POS);
+static SENSOR_DEVICE_ATTR(0v9_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_0V9_BIT_POS);
+static SENSOR_DEVICE_ATTR(5v0_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_5V0_BIT_POS);
+static SENSOR_DEVICE_ATTR(3v3_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_3V3_BIT_POS);
+static SENSOR_DEVICE_ATTR(2v5_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_2V5_BIT_POS);
+static SENSOR_DEVICE_ATTR(1v8_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_1V8_BIT_POS);
+static SENSOR_DEVICE_ATTR(opflag_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_OP_FLAG_BIT_POS);
+/* Second Power Good Register Bits */
+static SENSOR_DEVICE_ATTR(fbc2mp_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_FBC2MP_BIT_POS);
+static SENSOR_DEVICE_ATTR(fac2mp_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_FAC2MP_BIT_POS);
+static SENSOR_DEVICE_ATTR(fmcbvadj_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_FMCBVADJ_BIT_POS);
+static SENSOR_DEVICE_ATTR(fmcavadj_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_FMCAVADJ_BIT_POS);
+static SENSOR_DEVICE_ATTR(hl_vddq_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_HL_VDDQ_BIT_POS);
+static SENSOR_DEVICE_ATTR(hl_vdd_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_HL_VDD_BIT_POS);
+static SENSOR_DEVICE_ATTR(hlhps_vdd_alarm, S_IRUGO, altr_a10sr_read_status,
+              NULL, ALTR_A10SR_HL_HPS_BIT_POS);
+static SENSOR_DEVICE_ATTR(hps_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_HPS_BIT_POS);
+/* Third Power Good Register Bits */
+static SENSOR_DEVICE_ATTR(10v_alarm, S_IRUGO, altr_a10sr_read_status,
+              NULL, ALTR_A10SR_10V_FAIL_BIT_POS);
+static SENSOR_DEVICE_ATTR(fam2c_alarm, S_IRUGO, altr_a10sr_read_status, NULL,
+              ALTR_A10SR_FAM2C_BIT_POS);
+
+static DEVICE_ATTR(name, S_IRUGO, altr_a10sr_hwmon_show_name, NULL);
+
+static struct attribute *altr_a10sr_attr[] = {
+    &dev_attr_name.attr,
+    /* First Power Good Register */
+    &sensor_dev_attr_opflag_alarm.dev_attr.attr,
+    &sensor_dev_attr_1v8_alarm.dev_attr.attr,
+    &sensor_dev_attr_2v5_alarm.dev_attr.attr,
+    &sensor_dev_attr_1v0_alarm.dev_attr.attr,
+    &sensor_dev_attr_3v3_alarm.dev_attr.attr,
+    &sensor_dev_attr_5v0_alarm.dev_attr.attr,
+    &sensor_dev_attr_0v9_alarm.dev_attr.attr,
+    &sensor_dev_attr_0v95_alarm.dev_attr.attr,
+    /* Second Power Good Register */
+    &sensor_dev_attr_hps_alarm.dev_attr.attr,
+    &sensor_dev_attr_hlhps_vdd_alarm.dev_attr.attr,
+    &sensor_dev_attr_hl_vdd_alarm.dev_attr.attr,
+    &sensor_dev_attr_hl_vddq_alarm.dev_attr.attr,
+    &sensor_dev_attr_fmcavadj_alarm.dev_attr.attr,
+    &sensor_dev_attr_fmcbvadj_alarm.dev_attr.attr,
+    &sensor_dev_attr_fac2mp_alarm.dev_attr.attr,
+    &sensor_dev_attr_fbc2mp_alarm.dev_attr.attr,
+    /* Third Power Good Register */
+    &sensor_dev_attr_10v_alarm.dev_attr.attr,
+    &sensor_dev_attr_fam2c_alarm.dev_attr.attr,

Ultimately, this doesn't really make much sense, even with standard attribute
names. The ABI assumes that _input attrributes exist. Not sure if that could
be solved by providing 'dummy' unreadable input attributes (permission 0);
that might be worth a try. If you want to attach names to the attributes,
you would need to provide label attributes. Specifically you would need

    inX_input (with permission 0) - not sure if that is even possible
    inX_alarm
    inX_label

Hmm. OK. I may need to rethink this.

+    NULL
+};
+
+static const struct attribute_group altr_a10sr_attr_group = {
+    .attrs = altr_a10sr_attr
+};
+
+static int altr_a10sr_hwmon_probe(struct platform_device *pdev)
+{
+    struct altr_a10sr_hwmon *hwmon;
+    int ret;
+    struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+

What if someone creates a stand-alone devicetree property for this driver,
and there is no parent (or parent driver data) ?

I agree if this was a commercially available part. However, this is a specific driver for a programmable logic device (PLD) that will always be part of an MFD parent. The PLD only supports the Altera Development Kit.

+    hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+    if (!hwmon)
+        return -ENOMEM;
+
+    hwmon->regmap = a10sr->regmap;
+
+    platform_set_drvdata(pdev, hwmon);
+
+    ret = sysfs_create_group(&pdev->dev.kobj, &altr_a10sr_attr_group);
+    if (ret)
+        goto err_mem;
+
+    hwmon->class_device = hwmon_device_register(&pdev->dev);
+    if (IS_ERR(hwmon->class_device)) {
+        ret = PTR_ERR(hwmon->class_device);
+        goto err_sysfs;
+    }

Please use devm_hwmon_device_register_with_groups().

Understood. Thanks.

Thanks for reviewing.

+
+    return 0;
+
+err_sysfs:
+    sysfs_remove_group(&pdev->dev.kobj, &altr_a10sr_attr_group);
+err_mem:
+    return ret;
+}
+
+static int altr_a10sr_hwmon_remove(struct platform_device *pdev)
+{
+    struct altr_a10sr_hwmon *hwmon = platform_get_drvdata(pdev);
+
+    hwmon_device_unregister(hwmon->class_device);
+    sysfs_remove_group(&pdev->dev.kobj, &altr_a10sr_attr_group);
+
+    return 0;
+}
+
+static const struct of_device_id altr_a10sr_hwmon_of_match[] = {
+    { .compatible = "altr,a10sr-hwmon" },
+    { },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_hwmon_of_match);
+
+static struct platform_driver altr_a10sr_hwmon_driver = {
+    .probe = altr_a10sr_hwmon_probe,
+    .remove = altr_a10sr_hwmon_remove,
+    .driver = {
+        .name = "altr_a10sr_hwmon",
+        .of_match_table = of_match_ptr(altr_a10sr_hwmon_of_match),
+    },
+};
+
+module_platform_driver(altr_a10sr_hwmon_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("HW Monitor driver for Altera Arria10 System Resource Chip");
--
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html






