[PATCH v3] rtc: omap: Support ext_wakeup configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This is third approach for adding support of ext_wakeup configuration
in OMAP RTC.
Developed and tested on ChiliBoard (am335x) using v4.6-rc2.

Changes v2 -> v3:
 * Use gpiochip_request_own_desc() instead of gpiod_get_array() to make
   it possible to rmmod and insmod module (as suggested by Grygorii
   Strashko)
 * Go a little lower level, so the gpio number and active_low flag
   (present in device-tree bindings) are not hidden by gpiolib
   implementation

Changes v1 -> v2:
 * Use gpiochip implementation to utilize existing device-tree bindings
   (as suggested by Tony Lindgren)

Marcin Niestroj (1):
  rtc: omap: Support ext_wakeup configuration

 Documentation/devicetree/bindings/rtc/rtc-omap.txt |  18 +-
 drivers/rtc/Kconfig                                |   2 +-
 drivers/rtc/rtc-omap.c                             | 187 ++++++++++++++++++++-
 3 files changed, 204 insertions(+), 3 deletions(-)

-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux