Re: [PATCH v4 6/6] pinctrl: baytrail: Add debounce configuration

[Cristina Ciocan <cristina.ciocan@xxxxxxxxx>]

On 04.04.2016 17:17, Linus Walleij wrote:
> On Fri, Apr 1, 2016 at 1:00 PM, Cristina Ciocan
> <cristina.ciocan@xxxxxxxxx> wrote:
> 
>> Make debounce setting and getting functionality available when
>> configurating a certain pin.
>>
>> Signed-off-by: Cristina Ciocan <cristina.ciocan@xxxxxxxxx>
> 
> Patch applied.
> 
> And as this is another case where GPIO has a debounce
> setting call: gpiod_set_debounce() this is another case for
> my suggested pinctrl_gpio_set_config() as that call is
> currently not implemented in your corresponding .set_debounce()
> callback for the GPIO chip, but could easily be handled
> by calling back into the pinctrl back-end, right?
> 

Yes, it can be easily handled by calling back byt_pin_config_set. I will
look into what other options are often used and would make sense to be
exported in the gpio layer as well and come back with a more detailed
answer.

Thanks

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html