Re: [RFC 5/8] ARM: socfpga: dts: Add Devkit A10-SR fields for Arria10

[Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>]

On Tue, 29 Mar 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:

> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> 
> Add the Altera Arria10 System Resource node. This is a Multi-Function
> device with GPIO and HWMON support.
> 
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> 
> +		spi1: spi@ffda5000 {
> +			compatible = "snps,dw-apb-ssi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0xffda5000 0x100>;
> +			interrupts = <0 102 4>;
> +			num-chipselect = <4>;
> +			bus-num = <0>;
> +			/*32bit_access;*/
> +			tx-dma-channel = <&pdma 16>;
> +			rx-dma-channel = <&pdma 17>;
> +			clocks = <&spi_m_clk>;
> +			status = "disabled";
> +		};
> +

I think you need to split this into 2 patches, 1 for adding the SPI nodes, and
the 2nd for adding the slave device.

BR,
Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html