From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Add support for the Altera Arria10 Development Kit System Resource
chip which is implemented using a MAX5 as a external gpio extender,
and hardware monitor with the regmap framework over a SPI bus.
Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 2 +
drivers/mfd/altera-a10sr.c | 177 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/altera-a10sr.h | 146 +++++++++++++++++++++++++++++++
4 files changed, 336 insertions(+)
create mode 100644 drivers/mfd/altera-a10sr.c
create mode 100644 include/linux/mfd/altera-a10sr.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index eea61e3..d1edf81 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
+config MFD_ALTERA_A10SR
+ bool "Altera Arria10 DevKit System Resource chip"
+ depends on ARCH_SOCFPGA && SPI_MASTER=y
+ select REGMAP_SPI
+ select MFD_CORE
+ help
+ Support for the Altera Arria10 DevKit MAX5 System Resource chip
+ using the SPI interface. This driver provides common support for
+ accessing the external gpio extender (LEDs & buttons) and
+ hw monitor.
+
config MFD_ACT8945A
tristate "Active-semi ACT8945A"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5eaa6465d..4f1ff91 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,3 +203,5 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
+
+obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
new file mode 100644
index 0000000..13665d4
--- /dev/null
+++ b/drivers/mfd/altera-a10sr.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * SPI access for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ * Author: David Dajun Chen <dchen@xxxxxxxxxxx>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/spi/spi.h>
+
+static const struct mfd_cell altr_a10sr_subdev_info[] = {
+};
+
+static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ALTR_A10SR_VERSION_READ:
+ case ALTR_A10SR_LED_RD_REG:
+ case ALTR_A10SR_PBDSW_RD_REG:
+ case ALTR_A10SR_PBDSW_IRQ_CLR_REG:
+ case ALTR_A10SR_PBDSW_IRQ_RD_REG:
+ case ALTR_A10SR_PWR_GOOD1_RD_REG:
+ case ALTR_A10SR_PWR_GOOD2_RD_REG:
+ case ALTR_A10SR_PWR_GOOD3_RD_REG:
+ case ALTR_A10SR_FMCAB_RD_REG:
+ case ALTR_A10SR_HPS_RST_RD_REG:
+ case ALTR_A10SR_USB_QSPI_RD_REG:
+ case ALTR_A10SR_SFPA_RD_REG:
+ case ALTR_A10SR_SFPB_RD_REG:
+ case ALTR_A10SR_I2C_M_RD_REG:
+ case ALTR_A10SR_WARM_RST_RD_REG:
+ case ALTR_A10SR_WR_KEY_RD_REG:
+ case ALTR_A10SR_PMBUS_RD_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ALTR_A10SR_LED_WR_REG:
+ case ALTR_A10SR_PBDSW_IRQ_CLR_REG:
+ case ALTR_A10SR_FMCAB_WR_REG:
+ case ALTR_A10SR_HPS_RST_WR_REG:
+ case ALTR_A10SR_USB_QSPI_WR_REG:
+ case ALTR_A10SR_SFPA_WR_REG:
+ case ALTR_A10SR_SFPB_WR_REG:
+ case ALTR_A10SR_WARM_RST_WR_REG:
+ case ALTR_A10SR_WR_KEY_WR_REG:
+ case ALTR_A10SR_PMBUS_WR_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ALTR_A10SR_PBDSW_RD_REG:
+ case ALTR_A10SR_PBDSW_IRQ_RD_REG:
+ case ALTR_A10SR_PWR_GOOD1_RD_REG:
+ case ALTR_A10SR_PWR_GOOD2_RD_REG:
+ case ALTR_A10SR_PWR_GOOD3_RD_REG:
+ case ALTR_A10SR_HPS_RST_RD_REG:
+ case ALTR_A10SR_I2C_M_RD_REG:
+ case ALTR_A10SR_WARM_RST_RD_REG:
+ case ALTR_A10SR_WR_KEY_RD_REG:
+ case ALTR_A10SR_PMBUS_RD_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+const struct regmap_config altr_a10sr_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .cache_type = REGCACHE_NONE,
+
+ .use_single_rw = true,
+ .read_flag_mask = 1,
+ .write_flag_mask = 0,
+
+ .max_register = ALTR_A10SR_WR_KEY_RD_REG,
+ .readable_reg = altr_a10sr_reg_readable,
+ .writeable_reg = altr_a10sr_reg_writeable,
+ .volatile_reg = altr_a10sr_reg_volatile,
+
+};
+
+static int altr_a10sr_spi_probe(struct spi_device *spi)
+{
+ int ret;
+ struct altr_a10sr *a10sr;
+
+ a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr),
+ GFP_KERNEL);
+ if (!a10sr)
+ return -ENOMEM;
+
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ a10sr->dev = &spi->dev;
+
+ spi_set_drvdata(spi, a10sr);
+
+ a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config);
+ if (IS_ERR(a10sr->regmap)) {
+ ret = PTR_ERR(a10sr->regmap);
+ dev_err(&spi->dev, "Allocate register map Failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO,
+ altr_a10sr_subdev_info,
+ ARRAY_SIZE(altr_a10sr_subdev_info),
+ NULL, 0, NULL);
+ if (ret)
+ dev_err(a10sr->dev, "mfd_add_devices failed: %d\n", ret);
+
+ return ret;
+}
+
+static int altr_a10sr_spi_remove(struct spi_device *spi)
+{
+ mfd_remove_devices(&spi->dev);
+
+ return 0;
+}
+
+static const struct of_device_id altr_a10sr_spi_of_match[] = {
+ { .compatible = "altr,altr-a10sr" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match);
+
+static struct spi_driver altr_a10sr_spi_driver = {
+ .probe = altr_a10sr_spi_probe,
+ .remove = altr_a10sr_spi_remove,
+ .driver = {
+ .name = "altr_a10sr",
+ .of_match_table = altr_a10sr_spi_of_match,
+ },
+};
+
+module_spi_driver(altr_a10sr_spi_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer");
+MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver");
diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h
new file mode 100644
index 0000000..7087afc
--- /dev/null
+++ b/include/linux/mfd/altera-a10sr.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright Altera Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Declarations for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ * Author: David Dajun Chen <dchen@xxxxxxxxxxx>
+ */
+
+#ifndef __MFD_ALTERA_A10SR_H
+#define __MFD_ALTERA_A10SR_H
+
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+
+/* Write registers are always on even addresses */
+#define WRITE_REG_MASK 0xFE
+/* Odd registers are always on odd addresses */
+#define READ_REG_MASK 0x01
+
+#define ALTR_A10SR_BITS_PER_REGISTER 8
+/*
+ * To find the correct register, we divide the input GPIO by
+ * the number of GPIO in each register. We then need to multiply
+ * by 2 because the reads are at odd addresses.
+ */
+#define ALTR_A10SR_REG_OFFSET(X) (((X) / ALTR_A10SR_BITS_PER_REGISTER) << 1)
+#define ALTR_A10SR_REG_BIT(X) ((X) % ALTR_A10SR_BITS_PER_REGISTER)
+#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y))
+#define ALTR_A10SR_REG_BIT_MASK(X) (1 << ALTR_A10SR_REG_BIT(X))
+
+/* Arria10 System Controller Register Defines */
+#define ALTR_A10SR_NOP 0x00 /* No Change */
+#define ALTR_A10SR_VERSION_READ 0x01 /* MAX5 Version Read */
+#define ALTR_A10SR_LED_WR_REG 0x02 /* LED - Upper 4 bits */
+#define ALTR_A10SR_LED_RD_REG 0x03 /* LED - Upper 4 bits */
+#define ALTR_A10SR_PBDSW_RD_REG 0x05 /* PB & DIP SW - Input only */
+#define ALTR_A10SR_PBDSW_IRQ_CLR_REG 0x06 /* PB & DIP SW Flag Clear */
+#define ALTR_A10SR_PBDSW_IRQ_RD_REG 0x07 /* PB & DIP SW Flag Read */
+#define ALTR_A10SR_PWR_GOOD1_RD_REG 0x09 /* Power Good1 Read */
+#define ALTR_A10SR_PWR_GOOD2_RD_REG 0x0B /* Power Good2 Read */
+#define ALTR_A10SR_PWR_GOOD3_RD_REG 0x0D /* Power Good3 Read */
+#define ALTR_A10SR_FMCAB_WR_REG 0x0E /* FMCA/B & PCIe Pwr Enable */
+#define ALTR_A10SR_FMCAB_RD_REG 0x0F /* FMCA/B & PCIe Pwr Enable */
+#define ALTR_A10SR_HPS_RST_WR_REG 0x10 /* HPS Reset */
+#define ALTR_A10SR_HPS_RST_RD_REG 0x11 /* HPS Reset */
+#define ALTR_A10SR_USB_QSPI_WR_REG 0x12 /* USB, BQSPI, FILE Reset */
+#define ALTR_A10SR_USB_QSPI_RD_REG 0x13 /* USB, BQSPI, FILE Reset */
+#define ALTR_A10SR_SFPA_WR_REG 0x14 /* SFPA Control Reg */
+#define ALTR_A10SR_SFPA_RD_REG 0x15 /* SFPA Control Reg */
+#define ALTR_A10SR_SFPB_WR_REG 0x16 /* SFPB Control Reg */
+#define ALTR_A10SR_SFPB_RD_REG 0x17 /* SFPB Control Reg */
+#define ALTR_A10SR_I2C_M_RD_REG 0x19 /* I2C Master Select */
+#define ALTR_A10SR_WARM_RST_WR_REG 0x1A /* HPS Warm Reset */
+#define ALTR_A10SR_WARM_RST_RD_REG 0x1B /* HPS Warm Reset */
+#define ALTR_A10SR_WR_KEY_WR_REG 0x1C /* HPS Warm Reset Key */
+#define ALTR_A10SR_WR_KEY_RD_REG 0x1D /* HPS Warm Reset Key */
+#define ALTR_A10SR_PMBUS_WR_REG 0x1E /* HPS PM Bus */
+#define ALTR_A10SR_PMBUS_RD_REG 0x1F /* HPS PM Bus */
+
+struct altr_a10sr {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+/* Device I/O API */
+static inline int altr_a10sr_reg_read(struct altr_a10sr *a10sr,
+ unsigned char reg)
+{
+ int val, ret;
+
+ ret = regmap_read(a10sr->regmap, (reg | READ_REG_MASK), &val);
+ if (ret < 0)
+ return ret;
+
+ return val;
+}
+
+static inline int altr_a10sr_reg_write(struct altr_a10sr *a10sr,
+ unsigned char reg, unsigned char val)
+{
+ int ret;
+
+ ret = regmap_write(a10sr->regmap, (reg & WRITE_REG_MASK), val);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static inline int altr_a10sr_group_read(struct altr_a10sr *a10sr,
+ unsigned char reg,
+ unsigned int reg_cnt,
+ unsigned char *val)
+{
+ return regmap_bulk_read(a10sr->regmap, reg, val, reg_cnt);
+}
+
+static inline int altr_a10sr_group_write(struct altr_a10sr *a10sr,
+ unsigned char reg,
+ unsigned int reg_cnt,
+ unsigned char *val)
+{
+ return regmap_bulk_write(a10sr->regmap, reg, val, reg_cnt);
+}
+
+static inline int altr_a10sr_reg_update(struct altr_a10sr *a10sr,
+ unsigned char reg,
+ unsigned char bit_mask,
+ unsigned char reg_val)
+{
+ int rval, ret;
+
+ /*
+ * We can't use the standard regmap_update_bits function because
+ * the read register has a different address than the write register.
+ * Therefore, just do a read, modify, write operation here.
+ */
+ ret = regmap_read(a10sr->regmap, (reg | READ_REG_MASK), &rval);
+ if (ret < 0)
+ return ret;
+
+ rval = ((rval & ~bit_mask) | (reg_val & bit_mask));
+
+ ret = regmap_write(a10sr->regmap, (reg & WRITE_REG_MASK), rval);
+
+ return ret;
+}
+
+#endif /* __MFD_ALTERA_A10SR_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[RFC 3/8] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [RFC 3/8] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 29 Mar 2016 14:13:06 -0500
- Authentication-results: spf=fail (sender IP is 66.35.236.236) smtp.mailfrom=opensource.altera.com; hellion.org.uk; dkim=pass (signature was verified) header.d=altera.onmicrosoft.com;hellion.org.uk; dmarc=none action=none header.from=opensource.altera.com;
- Authentication-results: linaro.org; dkim=none (message not signed) header.d=none;linaro.org; dmarc=none action=none header.from=opensource.altera.com;
- In-reply-to: <1459278791-3646-1-git-send-email-tthayer@opensource.altera.com>
- Spamdiagnosticmetadata: NSPM
- Spamdiagnosticoutput: 1:23
- Follow-Ups:
- References:
- [RFC] Addition of Altera Arria10 System Resource Chip
- From: tthayer
- [RFC] Addition of Altera Arria10 System Resource Chip
- Prev by Date: [RFC] Addition of Altera Arria10 System Resource Chip
- Next by Date: [RFC 1/8] dt-bindings: mfd: Add Altera Arria10 System Resource Chip bindings
- Previous by thread: Re: [RFC 7/8] hwmon: Altera Arria10 System Resource Chip - HW Monitor
- Next by thread: Re: [RFC 3/8] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip
- Index(es):
 |