Re: [PATCH 03/17] pinctrl: qcom: ipq4019: fix register offsets

[Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>]

On Wed 23 Mar 15:04 PDT 2016, Matthew McClintock wrote:

> For this SoC the register offsets changed from previous versions to be
> separated by a larger amount.
> 
> CC: linus.walleij@xxxxxxxxxx

So the HW guys changed the register layout of the TLMM block? Matches
the layout of contemporary MSMs, so I see no problems with this.

Acked-by: bjorn.andersson@xxxxxxxxxx

Regards,
Bjorn

> Signed-off-by: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
> ---
>  drivers/pinctrl/qcom/pinctrl-ipq4019.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> index cb9f16a..b68ae42 100644
> --- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> @@ -254,11 +254,11 @@ DECLARE_QCA_GPIO_PINS(99);
>  			qca_mux_##f14			\
>  		},				        \
>  		.nfuncs = 15,				\
> -		.ctl_reg = 0x1000 + 0x10 * id,		\
> -		.io_reg = 0x1004 + 0x10 * id,		\
> -		.intr_cfg_reg = 0x1008 + 0x10 * id,	\
> -		.intr_status_reg = 0x100c + 0x10 * id,	\
> -		.intr_target_reg = 0x400 + 0x4 * id,	\
> +		.ctl_reg = 0x0 + 0x1000 * id,		\
> +		.io_reg = 0x4 + 0x1000 * id,		\
> +		.intr_cfg_reg = 0x8 + 0x1000 * id,	\
> +		.intr_status_reg = 0xc + 0x1000 * id,	\
> +		.intr_target_reg = 0x8 + 0x1000 * id,	\
>  		.mux_bit = 2,			\
>  		.pull_bit = 0,			\
>  		.drv_bit = 6,			\
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html