This allows to set multiple outputs using a single SPI transfer. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- drivers/gpio/gpio-74x164.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index c81224ff2dca988b..62291a81c97f7140 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -75,6 +75,29 @@ static void gen_74x164_set_value(struct gpio_chip *gc, mutex_unlock(&chip->lock); } +static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct gen_74x164_chip *chip = gpiochip_get_data(gc); + unsigned int i, idx, shift; + u8 bank, bankmask; + + mutex_lock(&chip->lock); + for (i = 0, bank = chip->registers - 1; i < chip->registers; + i++, bank--) { + idx = i / sizeof(*mask); + shift = i % sizeof(*mask) * BITS_PER_BYTE; + bankmask = mask[idx] >> shift; + if (!bankmask) + continue; + + chip->buffer[bank] &= ~bankmask; + chip->buffer[bank] |= bankmask & (bits[idx] >> shift); + } + __gen_74x164_write_config(chip); + mutex_unlock(&chip->lock); +} + static int gen_74x164_direction_output(struct gpio_chip *gc, unsigned offset, int val) { @@ -114,6 +137,7 @@ static int gen_74x164_probe(struct spi_device *spi) chip->gpio_chip.direction_output = gen_74x164_direction_output; chip->gpio_chip.get = gen_74x164_get_value; chip->gpio_chip.set = gen_74x164_set_value; + chip->gpio_chip.set_multiple = gen_74x164_set_multiple; chip->gpio_chip.base = -1; chip->registers = nregs; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html