Re: [PATCH 1/1] gpio: mcp23s08: Add support for mcp23s18.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 01, 2016 at 02:25:41PM +0800, Phil Reid wrote:
> This patch adds support for the mcp23s18 which is very similar to
> the mcp23s17. A couple of control bits are not the same.
> Notable IOCON_HAEN (s17 only) & IOCON_INTCC. Which can be ignored.
> 
> Patch changes the following:
> - Add mcp23s18 types.
> - Always set mirror bit if the dts defines mcp23s18. regardless of type.
>   Mirror bit is ignored on 8 bit devices anyway.
> - In mcp23s08_probe use chip.ngpio instead of logic based on type
>   to determine number of gpio lins to increment by. This is set
>   appropiately by the call to mcp23s08_probe_one.
> - Add mcp23s18 to device tree documentation.
> - Remove statement that irqs don't work for spi. They do.
>   Tested with mcp23s18.
> 
> Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/gpio/gpio-mcp23s08.txt        |  4 +---

Acked-by: Rob Herring <robh@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux