This adds A83T system bus clocks, bus gates, and clock resets. Three ahb reset registers are combined into one node. Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 114 +++++++++++++++++++++++++++++++++++++- 1 file changed, 112 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index d3473f8..fa7ded5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -146,6 +146,97 @@ clocks = <&osc16M>; clock-output-names = "osc16M-d512"; }; + + pll6: clk@01c20028 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6"; + }; + + pll6d2: pll6d2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll6>; + clock-output-names = "pll6d2"; + }; + + ahb1: clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a83t-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a83t-apb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + apb2: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "apb2"; + }; + + ahb2: clk@01c2005c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ahb2-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&ahb1>, <&pll6d2>; + clock-output-names = "ahb2"; + }; + + bus_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a83t-bus-gates-clk"; + reg = <0x01c20060 0x10>; + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; + clock-names = "ahb1", "ahb2", "apb1", "apb2"; + clock-indices = <1>, <5>, <6>, + <8>, <9>, <10>, + <13>, <14>, <17>, + <19>, <20>, + <21>, <24>, + <26>, <27>, + <29>, <32>, + <36>, <37>, + <40>, <43>, + <44>, <52>, <53>, + <54>, <65>, + <69>, <76>, <77>, + <78>, <79>, <96>, + <97>, <98>, + <112>, <113>, + <114>, <115>, + <116>; + clock-output-names = "bus_mipidsi", "bus_ss", "bus_dma", + "bus_mmc0", "bus_mmc1", "bus_mmc2", + "bus_nand", "bus_sdram", "bus_emac", + "bus_hstimer", "bus_spi0", + "bus_spi1", "bus_usb_otg", + "bus_ehci0", "bus_ehci1", + "bus_ohci0", "bus_ve", + "bus_lcd0", "bus_lcd1", + "bus_csi", "bus_hdmi", + "bus_de", "bus_gpu", "bus_msgbox", + "bus_spinlock", "bus_spidf", + "bus_pio", "bus_i2s0", "bus_i2s1", + "bus_i2s2", "bus_tdm", "bus_i2c0", + "bus_i2c1", "bus_i2c2", + "bus_uart0", "bus_uart1", + "bus_uart2", "bus_uart3", + "bus_uart4"; + }; }; soc { @@ -160,7 +251,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c20800 0x400>; - clocks = <&osc24M>; + clocks = <&bus_gates 69>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -189,12 +280,31 @@ }; }; + ahb_reset: reset@01c202c0 { + reg = <0x01c202c0 0xc>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + apb1_reset: reset@01c202d0 { + reg = <0x01c202d0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + apb2_reset: reset@01c202d8 { + reg = <0x01c202d8 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; + clocks = <&bus_gates 112>; + resets = <&apb2_reset 16>; }; watchdog@01c20ca0 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html