Re: [PATCH v2 2/8] drivers: pinctrl: add driver for Allwinner A64 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 17, 2016 at 11:43:54AM +0000, Andre Przywara wrote:
> Based on the Allwinner A64 user manual and on the previous sunxi
> pinctrl drivers this introduces the pin multiplex assignments for
> the ARMv8 Allwinner A64 SoC.
> Port A is apparently used for the fixed function DRAM controller, so
> the ports start at B here (the manual mentions "n from 1 to 7", so
> not starting at 0).
> 
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
>  .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt   |   1 +

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>  arch/arm64/Kconfig.platforms                       |   1 +
>  drivers/pinctrl/sunxi/Kconfig                      |   4 +
>  drivers/pinctrl/sunxi/Makefile                     |   1 +
>  drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c         | 606 +++++++++++++++++++++
>  5 files changed, 613 insertions(+)
>  create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux