Hi Magnus,
Thank you for the patch.
On Wednesday 17 February 2016 17:15:49 Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
>
> The sh-pfc pinctrl driver is currently handling SoC-specific
> PFC hardware blocks on ARM64, ARM and SH architectures.
>
> For older SoCs using SH cores and some 32-bit ARM SoCs the PFC
> hardware also provides GPIO functionality. On the majority of
> 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO
> feature is provided by separate hardware blocks.
>
> So far GPIO support in the PFC driver has been compiled-in for
> the majority of the SoCs, but with this patch applied the SoCs
> with PFC support may select from one of the following:
> - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware
> - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support
>
> This patch results in the following changes:
> - The GPIO functionality is only compiled-in on relevant SoCs
> - The number of lines of code is reduced
>
> Build tested using the following configurations:
> - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64)
> - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM)
> - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM)
> - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM)
> - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1)
> - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24)
>
> Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
>
> Changes since V1:
> - Simplied Makefile bits to remove sh-pfc-objs and use new Kconfig symbol
>
> drivers/pinctrl/sh-pfc/Kconfig | 54
> ++++++++++++++------------------------- drivers/pinctrl/sh-pfc/Makefile |
> 7 +----
> drivers/pinctrl/sh-pfc/core.c | 4 +-
> 3 files changed, 24 insertions(+), 41 deletions(-)
>
> --- 0001/drivers/pinctrl/sh-pfc/Kconfig
> +++ work/drivers/pinctrl/sh-pfc/Kconfig 2016-02-17 16:23:21.630513000 +0900
> @@ -5,7 +5,6 @@
> if ARCH_SHMOBILE || SUPERH
>
> config PINCTRL_SH_PFC
> - select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
> select PINMUX
> select PINCONF
> select GENERIC_PINCONF
> @@ -13,12 +12,12 @@ config PINCTRL_SH_PFC
> help
> This enables pin control drivers for SH and SH Mobile platforms
>
> -config GPIO_SH_PFC
> - bool "SuperH PFC GPIO support"
> - depends on PINCTRL_SH_PFC && GPIOLIB
> +config PINCTRL_SH_PFC_GPIO
> + select GPIOLIB
> + select PINCTRL_SH_PFC
> + def_bool n
> help
> - This enables support for GPIOs within the SoC's pin function
> - controller.
> + This enables pin control and GPIO drivers for SH/SH Mobile platforms
>
> config PINCTRL_PFC_EMEV2
> def_bool y
> @@ -28,12 +27,12 @@ config PINCTRL_PFC_EMEV2
> config PINCTRL_PFC_R8A73A4
> def_bool y
> depends on ARCH_R8A73A4
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_R8A7740
> def_bool y
> depends on ARCH_R8A7740
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_R8A7778
> def_bool y
> @@ -73,79 +72,66 @@ config PINCTRL_PFC_R8A7795
> config PINCTRL_PFC_SH7203
> def_bool y
> depends on CPU_SUBTYPE_SH7203
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7264
> def_bool y
> depends on CPU_SUBTYPE_SH7264
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7269
> def_bool y
> depends on CPU_SUBTYPE_SH7269
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH73A0
> def_bool y
> depends on ARCH_SH73A0
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
> select REGULATOR
>
> config PINCTRL_PFC_SH7720
> def_bool y
> depends on CPU_SUBTYPE_SH7720
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7722
> def_bool y
> depends on CPU_SUBTYPE_SH7722
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7723
> def_bool y
> depends on CPU_SUBTYPE_SH7723
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7724
> def_bool y
> depends on CPU_SUBTYPE_SH7724
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7734
> def_bool y
> depends on CPU_SUBTYPE_SH7734
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7757
> def_bool y
> depends on CPU_SUBTYPE_SH7757
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7785
> def_bool y
> depends on CPU_SUBTYPE_SH7785
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SH7786
> def_bool y
> depends on CPU_SUBTYPE_SH7786
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> + select PINCTRL_SH_PFC_GPIO
>
> config PINCTRL_PFC_SHX3
> def_bool y
> depends on CPU_SUBTYPE_SHX3
> - depends on GPIOLIB
> - select PINCTRL_SH_PFC
> -
> + select PINCTRL_SH_PFC_GPIO
> endif
> --- 0001/drivers/pinctrl/sh-pfc/Makefile
> +++ work/drivers/pinctrl/sh-pfc/Makefile 2016-02-17 16:26:18.660513000
+0900
> @@ -1,8 +1,5 @@
> -sh-pfc-objs = core.o pinctrl.o
> -ifeq ($(CONFIG_GPIO_SH_PFC),y)
> -sh-pfc-objs += gpio.o
> -endif
> -obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o
> +obj-$(CONFIG_PINCTRL_SH_PFC) += core.o pinctrl.o
> +obj-$(CONFIG_PINCTRL_SH_PFC_GPIO) += gpio.o
> obj-$(CONFIG_PINCTRL_PFC_EMEV2) += pfc-emev2.o
> obj-$(CONFIG_PINCTRL_PFC_R8A73A4) += pfc-r8a73a4.o
> obj-$(CONFIG_PINCTRL_PFC_R8A7740) += pfc-r8a7740.o
> --- 0001/drivers/pinctrl/sh-pfc/core.c
> +++ work/drivers/pinctrl/sh-pfc/core.c 2016-02-17 16:23:21.640513000 +0900
> @@ -558,7 +558,7 @@ static int sh_pfc_probe(struct platform_
> if (unlikely(ret != 0))
> return ret;
>
> -#ifdef CONFIG_GPIO_SH_PFC
> +#ifdef CONFIG_PINCTRL_SH_PFC_GPIO
> /*
> * Then the GPIO chip
> */
> @@ -584,7 +584,7 @@ static int sh_pfc_remove(struct platform
> {
> struct sh_pfc *pfc = platform_get_drvdata(pdev);
>
> -#ifdef CONFIG_GPIO_SH_PFC
> +#ifdef CONFIG_PINCTRL_SH_PFC_GPIO
> sh_pfc_unregister_gpiochip(pfc);
> #endif
> sh_pfc_unregister_pinctrl(pfc);
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] pinctrl: sh-pfc: Rework PFC GPIO support
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v2] pinctrl: sh-pfc: Rework PFC GPIO support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Date: Wed, 17 Feb 2016 16:04:43 +0200
- In-reply-to: <20160217081549.17344.77173.sendpatchset@little-apple>
- User-agent: KMail/4.14.8 (Linux/4.1.15-gentoo-r1; KDE/4.14.8; x86_64; ; )
- References:
- [PATCH v2] pinctrl: sh-pfc: Rework PFC GPIO support
- From: Magnus Damm
- [PATCH v2] pinctrl: sh-pfc: Rework PFC GPIO support
- Prev by Date: [PATCH v7 3/3] arm64: dts: Update X-Gene standby GPIO controller DTS entries
- Next by Date: Re: [PATCH v1] GPIO/ACPI: DesignWare: Add GPIO-signaled ACPI events support for power button
- Previous by thread: Re: [PATCH v2] pinctrl: sh-pfc: Rework PFC GPIO support
- Next by thread: [PATCH v2 2/8] drivers: pinctrl: add driver for Allwinner A64 SoC
- Index(es):
 |