Re: [PATCH 09/14] ARM: dts: sun8i-a83t: Add mmc controller nodes

[Chen-Yu Tsai <wens@xxxxxxxx>]

On Sun, Jan 31, 2016 at 9:21 AM, Vishnu Patekar
<vishnupatekar0510@xxxxxxxxx> wrote:
> A83T mmc is compatible with earliers sunxi socs.
> This adds mmc0, mmc1, and mmc2 controller nodes for A83T.
>
> Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 57 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index b8c8b60..ac96aa1 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -276,6 +276,63 @@
>                 #size-cells = <1>;
>                 ranges;
>
> +               mmc0: mmc@01c0f000 {
> +                       compatible = "allwinner,sun5i-a13-mmc";
> +                       reg = <0x01c0f000 0x1000>;
> +                       clocks = <&bus_gates 8>,
> +                                <&mmc0_clk 0>,
> +                                <&mmc0_clk 1>,
> +                                <&mmc0_clk 2>;
> +                       clock-names = "ahb",
> +                                     "mmc",
> +                                     "output",
> +                                     "sample";
> +                       resets = <&ahb_reset0 8>;
> +                       reset-names = "ahb";
> +                       interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               mmc1: mmc@01c10000 {
> +                       compatible = "allwinner,sun5i-a13-mmc";
> +                       reg = <0x01c10000 0x1000>;
> +                       clocks = <&bus_gates 9>,
> +                                <&mmc1_clk 0>,
> +                                <&mmc1_clk 1>,
> +                                <&mmc1_clk 2>;
> +                       clock-names = "ahb",
> +                                     "mmc",
> +                                     "output",
> +                                     "sample";
> +                       resets = <&ahb_reset0 9>;
> +                       reset-names = "ahb";
> +                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               mmc2: mmc@01c11000 {
> +                       compatible = "allwinner,sun5i-a13-mmc";
> +                       reg = <0x01c11000 0x1000>;
> +                       clocks = <&bus_gates 10>,
> +                                <&mmc2_clk 0>,
> +                                <&mmc2_clk 1>,
> +                                <&mmc2_clk 2>;
> +                       clock-names = "ahb",
> +                                     "mmc",
> +                                     "output",
> +                                     "sample";
> +                       resets = <&ahb_reset0 10>;
> +                       reset-names = "ahb";
> +                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +

This patch looks good, except for the reset control I pointed out in
the other patch.

Regards
ChenYu

>                 pio: pinctrl@01c20800 {
>                         compatible = "allwinner,sun8i-a83t-pinctrl";
>                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html