Re: [PATCH V2 3/4] 8250: 8250_f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO UART support

[One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>]

On Thu, 28 Jan 2016 17:20:37 +0800
Peter Hung <hpeter@xxxxxxxxx> wrote:

> This driver is 8250 driver for F81504/508/512, it'll handle the serial
> port operation of this device. This module will depend on
> MFD_FINTEK_F81504_CORE.
> 
> The serial ports support from 50bps to 1.5Mbps with Linux baudrate
> define excluding 1.0Mbps due to not support 16MHz clock source.
> 
> PCI Configuration Space Registers, set:0~11(Max):
>     40h + 8 * set:
>                    bit7~6: Clock source selector
>                        00: 1.8432MHz
>                        01: 18.432MHz
>                        10: 24MHz
>                        11: 14.769MHz
>                    bit0: UART enable
>     41h + 8 * set:
>                    bit5~4: RX trigger multiple
>                        00: 1x * trigger level
>                        01: 2x * trigger level
>                        10: 4x * trigger level
>                        11: 8x * trigger level
>                    bit1~0: FIFO Size
>                        11: 128Bytes
>     44h + 8 * set: UART IO address (LSB)
>     45h + 8 * set: UART IO address (MSB)
>     47h + 8 * set:
>                    bit5: RTS invert (bit4 must enable)
>                    bit4: RTS auto direction enable
>                          0: RTS control by MCR
>                          1: RTS driven high when TX, otherwise low
> 
> Suggested-by: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Peter Hung <hpeter+linux_kernel@xxxxxxxxx>

Nice

It and the GPIO driver parts

Reviewed-by: Alan Cox <gnomes@xxxxxxxxxxxxxxxxxxx>

Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html