[PATCH 02/18] mfd: adp5585: enable oscilator during probe

[Nuno Sá via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>]

From: Nuno Sá <nuno.sa@xxxxxxxxxx>

Make sure to enable the oscillator in the top device. This will allow to
not control this in the child PWM device as that would not work with
future support for keyboard matrix where the oscillator needs to be
always enabled (and so cannot be disabled by disabling PWM).

Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
---
 drivers/mfd/adp5585.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/mfd/adp5585.c b/drivers/mfd/adp5585.c
index 160e0b38106a6d78f7d4b7c866cb603d96ea673e..f17b5f2474cac6a403556694066f438288264a49 100644
--- a/drivers/mfd/adp5585.c
+++ b/drivers/mfd/adp5585.c
@@ -110,6 +110,13 @@ static const struct regmap_config adp5585_regmap_configs[] = {
 	},
 };
 
+static void adp5585_osc_disable(void *data)
+{
+	const struct adp5585_dev *adp5585 = data;
+
+	regmap_write(adp5585->regmap, ADP5585_GENERAL_CFG, 0);
+}
+
 static int adp5585_i2c_probe(struct i2c_client *i2c)
 {
 	const struct regmap_config *regmap_config;
@@ -138,6 +145,15 @@ static int adp5585_i2c_probe(struct i2c_client *i2c)
 		return dev_err_probe(&i2c->dev, -ENODEV,
 				     "Invalid device ID 0x%02x\n", id);
 
+	ret = regmap_set_bits(adp5585->regmap, ADP5585_GENERAL_CFG,
+			      ADP5585_OSC_EN);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&i2c->dev, adp5585_osc_disable, adp5585);
+	if (ret)
+		return ret;
+
 	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
 				   adp5585_devs, ARRAY_SIZE(adp5585_devs),
 				   NULL, 0, NULL);

-- 
2.48.1