Re: [RFC PATCH v2 04/16] dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf

[Rob Herring <robh@xxxxxxxxxx>]

On Sun, Mar 09, 2025 at 10:47:56AM +0200, Cosmin Tanislav wrote:
> MAX96717 is capable of configuring various pin properties.
> 
> Add pinctrl/pinconf properties to support this usecase.
> 
> Signed-off-by: Cosmin Tanislav <demonsingur@xxxxxxxxx>
> ---
>  .../media/i2c/maxim,max96717-pinctrl.yaml     | 71 +++++++++++++++++++
>  .../bindings/media/i2c/maxim,max96717.yaml    | 16 ++++-
>  MAINTAINERS                                   |  1 +
>  3 files changed, 87 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
> new file mode 100644
> index 000000000000..347e66a5320c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2025 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim GMSL2 Serializer Pinctrl
> +
> +maintainers:
> +  - Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/pincfg-node.yaml#
> +  - $ref: /schemas/pinctrl/pinmux-node.yaml#
> +
> +unevaluatedProperties: false
> +
> +properties:
> +  function: true
> +  pins: true
> +  drive-open-drain: true
> +  drive-push-pull: true
> +  bias-disable: true
> +  bias-pull-up: true
> +  bias-pull-down: true
> +  output-disable: true
> +  output-enable: true
> +  output-low: true
> +  output-high: true
> +  slew-rate: true
> +  input-enable: true
> +
> +  maxim,jitter-compensation:
> +    type: boolean
> +    description: Enables jitter compensation.
> +
> +  maxim,gmsl-tx:
> +    type: boolean
> +    description: Enable transmitting pin value to GMSL link.
> +
> +  maxim,gmsl-rx:
> +    type: boolean
> +    description: Enable receiving pin value from GMSL link.
> +
> +  maxim,gmsl-tx-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Identifier used while transmitting value to GMSL link.
> +      Default value matches the pin number.

Use normally wrapping or blank line between paragraphs.

> +    minimum: 0
> +    maximum: 31
> +
> +  maxim,gmsl-rx-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Identifier used while receiving value from GMSL link.
> +      Default value matches the pin number.
> +    minimum: 0
> +    maximum: 31
> +
> +  maxim,rclkout-clock:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Clock value.
> +      0 - XTAL / 1 = 25MHz
> +      1 - XTAL / 2 = 12.5MHz
> +      2 - XTAL / 4 = 6.25MHz
> +      3 - Reference PLL output
> +    minimum: 0
> +    maximum: 3
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> index dd28cc397674..0a43582168a8 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> @@ -120,7 +120,21 @@ required:
>    - reg
>    - ports
>  
> -additionalProperties: false
> +additionalProperties:
> +  anyOf:
> +    - type: object
> +      allOf:
> +        - $ref: /schemas/media/i2c/maxim,max96717-pinctrl.yaml#

You can drop the allOf here.

> +
> +      unevaluatedProperties: false
> +
> +    - type: object
> +      additionalProperties:
> +        type: object
> +        allOf:
> +          - $ref: /schemas/media/i2c/maxim,max96717-pinctrl.yaml#

And here.

> +
> +        unevaluatedProperties: false

Do you really need to support 2 forms?

This also allows the node names to be anything. We do that for existing 
cases, but for new ones you should define some prefix or suffix. 
Typically, '-pins$' is used.

Rob