[PATCH 1/2] arm64: dts: ti: k3-am62p: fix pinctrl settings

[Michael Walle <mwalle@xxxxxxxxxx>]

It appears that pinctrl-single is misused on this SoC to control both
the mux and the input and output and bias settings. This results in
non-working pinctrl configurations for GPIOs within the device tree.

This is what happens:
 (1) During startup the pinctrl settings are applied according to the
     device tree. I.e. the pin is configured as output and with
     pull-ups enabled.
 (2) During startup a device driver requests a GPIO.
 (3) pinctrl-single is applying the default GPIO setting according to
     the pinctrl-single,gpio-range property.

This would work as expected if the pinctrl-single is only controlling
the function mux, but it also controls the input/output buffer enable,
the pull-up and pull-down settings etc (pinctrl-single,function-mask
covers the entire pad setting instead of just the mux field).

Remove the pinctrl-single,gpio-range property, so that no settings are
applied during a gpio_request() call.

Fixes: d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---

Maybe one could also switch the pinctrl-single to a pinconf-single node
which is able to control all the bias settings and restrict
"pinctrl-single,function-mask" to just the actual function. Not
sure.

 .../boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi     |  8 --------
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi          | 14 --------------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index b33aff0d65c9..bd6a00d13aea 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -12,15 +12,7 @@ mcu_pmx0: pinctrl@4084000 {
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
-		pinctrl-single,gpio-range =
-			<&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>,
-			<&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>,
-			<&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>;
 		bootph-all;
-
-		mcu_pmx_range: gpio-range {
-			#pinctrl-single,gpio-range-cells = <3>;
-		};
 	};
 
 	mcu_esm: esm@4100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 420c77c8e9e5..0a888392137c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -42,20 +42,6 @@ &inta_main_dmss {
 	ti,interrupt-ranges = <5 69 35>;
 };
 
-&main_pmx0 {
-	pinctrl-single,gpio-range =
-		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 72 22 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
-
-	main_pmx0_range: gpio-range {
-		#pinctrl-single,gpio-range-cells = <3>;
-	};
-};
-
 &main_gpio0 {
 	gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
 			<&main_pmx0 70 72 22>;
-- 
2.39.5