On Fri, 14 Feb 2025 00:37:32 +0000, Andre Przywara wrote: > The A523 contains a pin controller similar to previous SoCs, although > using 10 GPIO banks (PortB-PortK), all of them being IRQ capable. > With this SoC we introduce a new style of binding, where the pinmux values > for each pin group are stored in the new "allwinner,pinmux" property in > the DT node, instead of requiring every driver to store a mapping between > the function names and the required pinmux. > > Add a new binding file, since all the different variants of the old > binding are making the file a bit unwieldy to handle already, and the new > property would make the situation worse. > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> > --- > .../allwinner,sun55i-a523-pinctrl.yaml | 177 ++++++++++++++++++ > 1 file changed, 177 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/allwinner,sun55i-a523-pinctrl.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/pinctrl/allwinner,sun55i-a523-pinctrl.example.dts:24:18: fatal error: dt-bindings/clock/sun55i-a523-r-ccu.h: No such file or directory 24 | #include <dt-bindings/clock/sun55i-a523-r-ccu.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/pinctrl/allwinner,sun55i-a523-pinctrl.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1511: dt_binding_check] Error 2 make: *** [Makefile:251: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250214003734.14944-7-andre.przywara@xxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.