[PATCH v1 3/5] gpio: regmap: Group optional assignments together for better understanding

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

Group ngpio_per_reg, reg_stride, and reg_mask_xlate assignments together
with the respective conditional for better understanding what's going on
in the code.

While at it, mark ngpio_per_reg as (Optional) in the kernel-doc
in accordance with what code actually does.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/gpio/gpio-regmap.c  | 6 +++---
 include/linux/gpio/regmap.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 05f8781b5204..7775b0c56602 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -233,9 +233,6 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 	gpio->parent = config->parent;
 	gpio->driver_data = config->drvdata;
 	gpio->regmap = config->regmap;
-	gpio->ngpio_per_reg = config->ngpio_per_reg;
-	gpio->reg_stride = config->reg_stride;
-	gpio->reg_mask_xlate = config->reg_mask_xlate;
 	gpio->reg_dat_base = config->reg_dat_base;
 	gpio->reg_set_base = config->reg_set_base;
 	gpio->reg_clr_base = config->reg_clr_base;
@@ -243,13 +240,16 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 	gpio->reg_dir_out_base = config->reg_dir_out_base;
 
 	/* if not set, assume there is only one register */
+	gpio->ngpio_per_reg = config->ngpio_per_reg;
 	if (!gpio->ngpio_per_reg)
 		gpio->ngpio_per_reg = config->ngpio;
 
 	/* if not set, assume they are consecutive */
+	gpio->reg_stride = config->reg_stride;
 	if (!gpio->reg_stride)
 		gpio->reg_stride = 1;
 
+	gpio->reg_mask_xlate = config->reg_mask_xlate;
 	if (!gpio->reg_mask_xlate)
 		gpio->reg_mask_xlate = gpio_regmap_simple_xlate;
 
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index a9f7b7faf57b..b9240e4156cc 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -30,7 +30,7 @@ struct regmap;
  * @reg_dir_out_base:	(Optional) out setting register base address
  * @reg_stride:		(Optional) May be set if the registers (of the
  *			same type, dat, set, etc) are not consecutive.
- * @ngpio_per_reg:	Number of GPIOs per register
+ * @ngpio_per_reg:	(Optional) Number of GPIOs per register
  * @irq_domain:		(Optional) IRQ domain if the controller is
  *			interrupt-capable
  * @reg_mask_xlate:     (Optional) Translates base address and GPIO
-- 
2.45.1.3035.g276e886db78b