Re: [PATCH v8 2/3] ACPI / gpio: Add irq_type when a gpio is used as an interrupt

[Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>]

On Wed, Dec 23, 2015 at 11:25:34PM +0100, Christophe Ricard wrote:
> When a gpio is used as an interrupt in acpi, the irq_type was not
> available for device driver.
> 
> Make available polarity and triggering information in acpi_find_gpio by
> renaming acpi_gpio_info field active_low  to polarity and adding triggering
> field (edge/level).
> For sanity, in gpiolib.c replace info.active_low by
> "info.polarity == GPIO_ACTIVE_LOW".
> 
> Set the irq_type if necessary in acpi_dev_gpio_irq_get.
> 
> Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>

Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html