[PATCH 0/7] pinctrl: bcm281xx: Add support for BCM21664 pinmux

[Artur Weber <aweber.kernel@xxxxxxxxx>]

BCM21664 is another chip from the Kona line of Broadcom SoCs, and
its pinmux shares a lot of similarities with the BCM281xx pinmux.

Add support for the BCM21664 pinmux controller to the BCM281xx driver.

This also enables pinmux support for the BCM23550, which has an
identical pinmux config to the BCM21664 (hence they can share a
single compatible, brcm,bcm21664-pinctrl).

While we're at it - fix a bug that affected higher registers in the
BCM281XX driver and replace bare "unsigned" with "unsigned int" to
comply with checkpatch requirements.

Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
By the way - while working on this patch, I noticed two things that
are not implemented in mainline, but seem to be present in the pin
controller regs according to the RDB[1][2]:

- On both BCM21664 and BCM281XX, TRACE* pins only have two bits for
  DRV_STR and no HYST bit. That seems like it deserves its own pin
  type; however, since I don't know how to translate the reduced
  DRV_STR value to a drive strength in mA, I did not implement it.
  For now, I kept the same type for BCM21664 as for BCM281XX for these
  pins (standard).

- On both BCM21664 and BCM281XX, two SIM-related pins (SIM and SIM2
  on BCM281XX, SIMDAT and SSPDO on BCM21664) have extra PUPM0 and PUPM1
  offsets (bits 11 and 12 respectively). Vendor kernel does not do
  anything with these bits, so I don't know what they do.

If any Broadcom engineers could shed some light on these, I'd be
grateful. Otherwise, neither of these are pressing issues, and this
patchset is complete without them (they can be fixed in another
patchset).

[1] https://github.com/knuxdroid/android_kernel_samsung_baffinlite/blob/cm-12.1/arch/arm/mach-hawaii/include/mach/rdb/brcm_rdb_padctrlreg.h
[2] https://github.com/s2plus/android_kernel_samsung_galaxys2plus/blob/cm-10.1_base-4.2/arch/arm/mach-capri/include/mach/rdb/brcm_rdb_padctrlreg.h

---
Artur Weber (7):
      dt-bindings: pinctrl: Add bindings for BCM21664 pin controller
      pinctrl: bcm281xx: Fix incorrect regmap max_registers value
      pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"
      pinctrl: bcm281xx: Provide pinctrl device info as OF platform data
      pinctrl: bcm281xx: Add support for BCM21664 pinmux
      ARM: dts: bcm2166x-common: Add pinctrl node
      ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI

 .../bindings/pinctrl/brcm,bcm21664-pinctrl.yaml    | 169 ++++
 arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi    |   7 +
 arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi   | 297 +++++++
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c             | 849 +++++++++++++++++++--
 4 files changed, 1259 insertions(+), 63 deletions(-)
---
base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04
change-id: 20250206-bcm21664-pinctrl-13cd7d3f7866

Best regards,
-- 
Artur Weber <aweber.kernel@xxxxxxxxx>