Re: [PATCH v3 1/7] mfd: Add core driver for Nuvoton NCT6694

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On 10/12/2024 11:45, Ming Yu wrote:
> +	nct6694->int_buffer = devm_kcalloc(dev, NCT6694_MAX_PACKET_SZ,
> +					   sizeof(unsigned char), GFP_KERNEL);
> +	if (!nct6694->int_buffer)
> +		return -ENOMEM;
> +
> +	nct6694->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
> +	if (!nct6694->int_in_urb)
> +		return -ENOMEM;
> +
> +	nct6694->domain = irq_domain_add_simple(NULL, NCT6694_NR_IRQS, 0,
> +						&nct6694_irq_domain_ops,
> +						nct6694);
> +	if (!nct6694->domain)
> +		return -ENODEV;
> +
> +	nct6694->udev = udev;
> +	nct6694->timeout = NCT6694_URB_TIMEOUT;	/* Wait until urb complete */
> +	nct6694->cmd_header = cmd_header;
> +	nct6694->response_header = response_header;
> +
> +	mutex_init(&nct6694->access_lock);
> +	mutex_init(&nct6694->irq_lock);
> +
> +	usb_fill_int_urb(nct6694->int_in_urb, udev, pipe,
> +			 nct6694->int_buffer, maxp, usb_int_callback,
> +			 nct6694, int_endpoint->bInterval);
> +	ret = usb_submit_urb(nct6694->int_in_urb, GFP_KERNEL);
> +	if (ret)
> +		goto err_urb;
> +
> +	dev_set_drvdata(dev, nct6694);
> +	usb_set_intfdata(iface, nct6694);
> +
> +	ret = mfd_add_hotplug_devices(dev, nct6694_dev, ARRAY_SIZE(nct6694_dev));
> +	if (ret)
> +		goto err_mfd;
> +
> +	dev_info(dev, "Probed device: (%04X:%04X)\n", id->idVendor, id->idProduct);

Drop. Duplicating existing messages and interfaces. Your driver is
supposed to be silent on success.

> +	return 0;
> +
> +err_mfd:
> +	usb_kill_urb(nct6694->int_in_urb);
> +err_urb:
> +	usb_free_urb(nct6694->int_in_urb);
> +	return dev_err_probe(dev, ret, "Probe failed\n");

No, this should go to individual call causing errors so this will be
informative. Above is not informative at all and kernel already reports
this, so drop.

> +}
> +
> +static void nct6694_usb_disconnect(struct usb_interface *iface)
> +{
> +	struct usb_device *udev = interface_to_usbdev(iface);
> +	struct nct6694 *nct6694 = usb_get_intfdata(iface);


Best regards,
Krzysztof