Add a helper for the common read-modify-write pattern (only used in tqmx86_gpio_irq_config() initially). No functional change intended. Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx> --- drivers/gpio/gpio-tqmx86.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.c index 27f44d112d582..54e7e193bb209 100644 --- a/drivers/gpio/gpio-tqmx86.c +++ b/drivers/gpio/gpio-tqmx86.c @@ -65,6 +65,18 @@ static void tqmx86_gpio_write(struct tqmx86_gpio_data *gd, u8 val, iowrite8(val, gd->io_base + reg); } +static void tqmx86_gpio_clrsetbits(struct tqmx86_gpio_data *gpio, + u8 clr, u8 set, unsigned int reg) + __must_hold(&gpio->spinlock) +{ + u8 val = tqmx86_gpio_read(gpio, reg); + + val &= ~clr; + val |= set; + + tqmx86_gpio_write(gpio, val, reg); +} + static int tqmx86_gpio_get(struct gpio_chip *chip, unsigned int offset) { struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); @@ -118,7 +130,7 @@ static int tqmx86_gpio_get_direction(struct gpio_chip *chip, static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int hwirq) __must_hold(&gpio->spinlock) { - u8 type = TQMX86_INT_TRIG_NONE, gpiic; + u8 type = TQMX86_INT_TRIG_NONE; int gpiic_irq = hwirq - TQMX86_NGPO; if (gpio->irq_type[hwirq] & TQMX86_INT_UNMASKED) { @@ -130,10 +142,10 @@ static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int hwirq) : TQMX86_INT_TRIG_RISING; } - gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); - gpiic &= ~TQMX86_GPIIC_MASK(gpiic_irq); - gpiic |= TQMX86_GPIIC_CONFIG(gpiic_irq, type); - tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC); + tqmx86_gpio_clrsetbits(gpio, + TQMX86_GPIIC_MASK(gpiic_irq), + TQMX86_GPIIC_CONFIG(gpiic_irq, type), + TQMX86_GPIIC); } static void tqmx86_gpio_irq_mask(struct irq_data *data) -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider https://www.tq-group.com/