On 11/8/24 9:58 AM, Matwey V. Kornilov wrote: > > Hi Frank, > > > Are you going to further proceed with this patch set? As far as I can see, there were no updates since 2022. > Hi Matwey, I've been maintaining it at https://github.com/frank-zago/ch341-i2c-spi-gpio, but I have had no desire to try again to upstream it. Feel free to do it if you'd like. Also there's been an SPI only driver that was upstreamed a couple revisions ago, which is incompatible with this driver. Regards, Frank.
Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- From: Frank Zago <frank@xxxxxxxx>
- Date: Fri, 8 Nov 2024 17:15:50 -0600
- In-reply-to: <cf32d676-831c-4c3f-8965-c9be3abd5300@gmail.com>
- References: <20220616013747.126051-1-frank@zago.net> <cf32d676-831c-4c3f-8965-c9be3abd5300@gmail.com>
- User-agent: Mozilla Thunderbird
- Follow-Ups:
- Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- From: Matwey V. Kornilov
- Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- References:
- [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- From: frank zago
- Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- From: Matwey V. Kornilov
- [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- Prev by Date: [linusw-pinctrl:for-next] BUILD SUCCESS 8bd815bab7f7643e54db2de01564f11f81b1fefa
- Next by Date: Re: [PATCH v3 07/14] pinctrl: qcom: Add MSM8917 tlmm pinctrl driver
- Previous by thread: Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- Next by thread: Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
- Index(es):
 |