Re: [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device

[Stanimir Varbanov <svarbanov@xxxxxxx>]

Hi Andrea,

On 10/28/24 16:07, Andrea della Porta wrote:
> RaspberryPi RP1 is a multi function PCI endpoint device that
> exposes several subperipherals via PCI BAR.
> Add a dtb overlay that will be compiled into a binary blob
> and linked in the RP1 driver.
> This overlay offers just minimal support to represent the
> RP1 device itself, the sub-peripherals will be added by
> future patches.
> 
> Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> ---
> NOTE: this patch should be taken by the same maintainer that will take
> "[PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver", since they
> are closely related in terms of compiling.
> 
>  MAINTAINERS                           |  1 +
>  arch/arm64/boot/dts/broadcom/rp1.dtso | 61 +++++++++++++++++++++++++++
>  2 files changed, 62 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 06277969a522..510a071ede78 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19383,6 +19383,7 @@ F:	include/uapi/linux/media/raspberrypi/
>  RASPBERRY PI RP1 PCI DRIVER
>  M:	Andrea della Porta <andrea.porta@xxxxxxxx>
>  S:	Maintained
> +F:	arch/arm64/boot/dts/broadcom/rp1.dtso
>  F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
>  F:	Documentation/devicetree/bindings/misc/pci1de4,1.yaml
>  F:	Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
> diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
> new file mode 100644
> index 000000000000..8d1bbf207a30
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> +	fragment@0 {
> +		target-path="";
> +		__overlay__ {
> +			compatible = "pci1de4,1";
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			pci_ep_bus: pci-ep-bus@1 {
> +				compatible = "simple-bus";
> +				ranges = <0xc0 0x40000000
> +					  0x01 0x00 0x00000000
> +					  0x00 0x00400000>;
> +				dma-ranges = <0x10 0x00000000
> +					      0x43000000 0x10 0x00000000
> +					      0x10 0x00000000>;
> +				#address-cells = <2>;
> +				#size-cells = <2>;
> +
> +				rp1_clocks: clocks@c040018000 {
> +					compatible = "raspberrypi,rp1-clocks";
> +					reg = <0xc0 0x40018000 0x0 0x10038>;

shouldn't this be:

	rp1_clocks: clocks@18000 {
		reg = <0x00 0x00018000 0x0 0x10038>;
		...
	}

?

And for other nodes too...

~Stan

> +					#clock-cells = <1>;
> +					clocks = <&clk_rp1_xosc>;
> +					clock-names = "xosc";
> +					assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
> +							  <&rp1_clocks RP1_PLL_SYS>,
> +							  <&rp1_clocks RP1_CLK_SYS>;
> +					assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
> +							       <200000000>,  // RP1_PLL_SYS
> +							       <200000000>;  // RP1_CLK_SYS
> +				};
> +
> +				rp1_gpio: pinctrl@c0400d0000 {
> +					compatible = "raspberrypi,rp1-gpio";
> +					reg = <0xc0 0x400d0000  0x0 0xc000>,
> +					      <0xc0 0x400e0000  0x0 0xc000>,
> +					      <0xc0 0x400f0000  0x0 0xc000>;
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					interrupt-controller;
> +					#interrupt-cells = <2>;
> +					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
> +						     <1 IRQ_TYPE_LEVEL_HIGH>,
> +						     <2 IRQ_TYPE_LEVEL_HIGH>;
> +				};
> +			};
> +		};
> +	};
> +};