Quoting Andrea della Porta (2024-10-28 07:07:24)
> diff --git a/drivers/clk/clk-rp1.c b/drivers/clk/clk-rp1.c
> new file mode 100644
> index 000000000000..69b9cf037cb2
> --- /dev/null
[...]
> +
> +struct rp1_clockman {
> + struct device *dev;
> + void __iomem *regs;
Do you still need this if there's a regmap?
> + struct regmap *regmap;
> + spinlock_t regs_lock; /* spinlock for all clocks */
Do you need this or is the spinlock in the regmap sufficient?
> +
> + /* Must be last */
> + struct clk_hw_onecell_data onecell;
> +};
> +
> +struct rp1_pll_core_data {
> + const char *name;
These 'name' members can move to clk_init_data?
> + u32 cs_reg;
> + u32 pwr_reg;
> + u32 fbdiv_int_reg;
> + u32 fbdiv_frac_reg;
> + unsigned long flags;
And probably flags as well? It seems like clk_init_data should be
declared at the same time as struct rp1_pll_core_data is.
> + u32 fc0_src;
> +};
> +
> +struct rp1_pll_data {
> + const char *name;
> + u32 ctrl_reg;
> + unsigned long flags;
> + u32 fc0_src;
> +};
> +
> +struct rp1_pll_ph_data {
> + const char *name;
> + unsigned int phase;
> + unsigned int fixed_divider;
> + u32 ph_reg;
> + unsigned long flags;
> + u32 fc0_src;
> +};
> +
> +struct rp1_pll_divider_data {
> + const char *name;
> + u32 sec_reg;
> + unsigned long flags;
> + u32 fc0_src;
> +};
> +
> +struct rp1_clock_data {
> + const char *name;
> + int num_std_parents;
> + int num_aux_parents;
> + unsigned long flags;
> + u32 oe_mask;
> + u32 clk_src_mask;
> + u32 ctrl_reg;
> + u32 div_int_reg;
> + u32 div_frac_reg;
> + u32 sel_reg;
> + u32 div_int_max;
> + unsigned long max_freq;
> + u32 fc0_src;
> +};
> +
> +struct rp1_clk_desc {
> + struct clk_hw *(*clk_register)(struct rp1_clockman *clockman,
> + struct rp1_clk_desc *desc);
> + const void *data;
> + struct clk_hw hw;
> + struct rp1_clockman *clockman;
> + unsigned long cached_rate;
> + struct clk_divider div;
> +};
> +
> +#define FIELD_SET(_reg, _mask, _val) \
> +do { \
> + u32 mask = (_mask); \
> + (_reg) &= ~mask; \
> + (_reg) |= FIELD_PREP(mask, (_val)); \
Please just write
reg &= ~mask
reg |= FIELD_PREP(mask, val);
instead of using this macro.
> +} while (0)
> +
> +
[...]
> +
> +static struct clk_hw *rp1_register_pll_core(struct rp1_clockman *clockman,
> + struct rp1_clk_desc *desc)
> +{
> + const struct rp1_pll_core_data *pll_core_data = desc->data;
> + struct clk_init_data init = { };
> + int ret;
> +
> + /* All of the PLL cores derive from the external oscillator. */
> + init.parent_data = desc->hw.init->parent_data;
> + init.num_parents = desc->hw.init->num_parents;
> + init.name = pll_core_data->name;
> + init.ops = &rp1_pll_core_ops;
> + init.flags = pll_core_data->flags | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL;
> +
> + desc->clockman = clockman;
> + desc->hw.init = &init;
> +
> + ret = devm_clk_hw_register(clockman->dev, &desc->hw);
> +
> + if (ret)
> + return ERR_PTR(ret);
> +
> + return &desc->hw;
> +}
> +
> +static struct clk_hw *rp1_register_pll(struct rp1_clockman *clockman,
> + struct rp1_clk_desc *desc)
> +{
> + const struct rp1_pll_data *pll_data = desc->data;
> + struct clk_init_data init = { };
> + int ret;
> +
> + init.parent_data = desc->hw.init->parent_data;
> + init.num_parents = desc->hw.init->num_parents;
> + init.name = pll_data->name;
> + init.ops = &rp1_pll_ops;
> + init.flags = pll_data->flags | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL;
> +
> + desc->clockman = clockman;
> + desc->hw.init = &init;
> +
> + ret = devm_clk_hw_register(clockman->dev, &desc->hw);
> +
> + if (ret)
> + return ERR_PTR(ret);
> +
> + return &desc->hw;
> +}
> +
> +static struct clk_hw *rp1_register_pll_ph(struct rp1_clockman *clockman,
> + struct rp1_clk_desc *desc)
> +{
> + const struct rp1_pll_ph_data *ph_data = desc->data;
> + struct clk_init_data init = { };
> + int ret;
> +
> + init.parent_data = desc->hw.init->parent_data;
> + init.num_parents = desc->hw.init->num_parents;
> + init.name = ph_data->name;
> + init.ops = &rp1_pll_ph_ops;
> + init.flags = ph_data->flags | CLK_IGNORE_UNUSED;
> +
> + desc->clockman = clockman;
> + desc->hw.init = &init;
> +
> + ret = devm_clk_hw_register(clockman->dev, &desc->hw);
> +
> + if (ret)
> + return ERR_PTR(ret);
> +
> + return &desc->hw;
> +}
> +
> +static struct clk_hw *rp1_register_pll_divider(struct rp1_clockman *clockman,
> + struct rp1_clk_desc *desc)
> +{
> + const struct rp1_pll_data *divider_data = desc->data;
> + struct clk_init_data init = { };
> + int ret;
> +
> + init.parent_data = desc->hw.init->parent_data;
> + init.num_parents = desc->hw.init->num_parents;
> + init.name = divider_data->name;
> + init.ops = &rp1_pll_divider_ops;
> + init.flags = divider_data->flags | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL;
> +
> + desc->div.reg = clockman->regs + divider_data->ctrl_reg;
Why is 'regs' used here? Isn't everything using a regmap now so it's all
offsets?
> + desc->div.shift = PLL_SEC_DIV_SHIFT;
> + desc->div.width = PLL_SEC_DIV_WIDTH;
> + desc->div.flags = CLK_DIVIDER_ROUND_CLOSEST;
> + desc->div.flags |= CLK_IS_CRITICAL;
> + desc->div.lock = &clockman->regs_lock;
> + desc->div.hw.init = &init;
> + desc->div.table = pll_sec_div_table;
> +
> + desc->clockman = clockman;
> +
> + ret = devm_clk_hw_register(clockman->dev, &desc->div.hw);
> +
> + if (ret)
> + return ERR_PTR(ret);
> +
> + return &desc->div.hw;
> +}
> +
> +static struct clk_hw *rp1_register_clock(struct rp1_clockman *clockman,
> + struct rp1_clk_desc *desc)
> +{
> + const struct rp1_clock_data *clock_data = desc->data;
> + struct clk_init_data init = { };
> + int ret;
> +
> + if (WARN_ON_ONCE(MAX_CLK_PARENTS <
> + clock_data->num_std_parents + clock_data->num_aux_parents))
> + return NULL;
> +
> + /* There must be a gap for the AUX selector */
> + if (WARN_ON_ONCE(clock_data->num_std_parents > AUX_SEL &&
> + desc->hw.init->parent_data[AUX_SEL].index != -1))
> + return NULL;
> +
> + init.parent_data = desc->hw.init->parent_data;
> + init.num_parents = desc->hw.init->num_parents;
> + init.name = clock_data->name;
> + init.flags = clock_data->flags | CLK_IGNORE_UNUSED;
> + init.ops = &rp1_clk_ops;
> +
> + desc->clockman = clockman;
> + desc->hw.init = &init;
> +
> + ret = devm_clk_hw_register(clockman->dev, &desc->hw);
> +
> + if (ret)
> + return ERR_PTR(ret);
> +
> + return &desc->hw;
> +}
> +
> +/* Assignment helper macros for different clock types. */
> +#define _REGISTER(f, ...) { .clk_register = f, __VA_ARGS__ }
> +
> +#define PARENT_CLK(pnum, ...) .hw.init = &(const struct clk_init_data) { \
Instead of this macro just use CLK_HW_INIT_HW() or
CLK_HW_INIT_PARENTS_DATA()?
> + .parent_data = (const struct \
> + clk_parent_data[]) { \
> + __VA_ARGS__ \
> + }, \
> + .num_parents = pnum }
> +
> +#define CLK_DATA(type, ...) .data = &(struct type) { __VA_ARGS__ }
> +
> +#define REGISTER_PLL_CORE(...) _REGISTER(&rp1_register_pll_core, \
> + __VA_ARGS__)
> +
> +#define REGISTER_PLL(...) _REGISTER(&rp1_register_pll, \
> + __VA_ARGS__)
> +
> +#define REGISTER_PLL_PH(...) _REGISTER(&rp1_register_pll_ph, \
> + __VA_ARGS__)
> +
> +#define REGISTER_PLL_DIV(...) _REGISTER(&rp1_register_pll_divider, \
> + __VA_ARGS__)
> +
> +#define REGISTER_CLK(...) _REGISTER(&rp1_register_clock, \
> + __VA_ARGS__)
> +
> +static struct rp1_clk_desc clk_desc_array[] = {
> + [RP1_PLL_SYS_CORE] = REGISTER_PLL_CORE(PARENT_CLK(1, { .index = 0 }),
> + CLK_DATA(rp1_pll_core_data,
> + .name = "pll_sys_core",
> + .cs_reg = PLL_SYS_CS,
> + .pwr_reg = PLL_SYS_PWR,
> + .fbdiv_int_reg = PLL_SYS_FBDIV_INT,
> + .fbdiv_frac_reg = PLL_SYS_FBDIV_FRAC,
> + )),
> +
> + [RP1_PLL_AUDIO_CORE] = REGISTER_PLL_CORE(PARENT_CLK(1, { .index = 0 }),
> + CLK_DATA(rp1_pll_core_data,
> + .name = "pll_audio_core",
> + .cs_reg = PLL_AUDIO_CS,
> + .pwr_reg = PLL_AUDIO_PWR,
> + .fbdiv_int_reg = PLL_AUDIO_FBDIV_INT,
> + .fbdiv_frac_reg = PLL_AUDIO_FBDIV_FRAC,
> + )),
> +
> + [RP1_PLL_VIDEO_CORE] = REGISTER_PLL_CORE(PARENT_CLK(1, { .index = 0 }),
> + CLK_DATA(rp1_pll_core_data,
> + .name = "pll_video_core",
> + .cs_reg = PLL_VIDEO_CS,
> + .pwr_reg = PLL_VIDEO_PWR,
> + .fbdiv_int_reg = PLL_VIDEO_FBDIV_INT,
> + .fbdiv_frac_reg = PLL_VIDEO_FBDIV_FRAC,
> + )),
> +
> + [RP1_PLL_SYS] = REGISTER_PLL(PARENT_CLK(1,
> + { .hw = &clk_desc_array[RP1_PLL_SYS_CORE].hw }
> + ),
> + CLK_DATA(rp1_pll_data,
> + .name = "pll_sys",
> + .ctrl_reg = PLL_SYS_PRIM,
> + .fc0_src = FC_NUM(0, 2),
> + )),
> +
> + [RP1_CLK_ETH_TSU] = REGISTER_CLK(PARENT_CLK(1, { .index = 0 }),
> + CLK_DATA(rp1_clock_data,
> + .name = "clk_eth_tsu",
> + .num_std_parents = 0,
> + .num_aux_parents = 1,
> + .ctrl_reg = CLK_ETH_TSU_CTRL,
> + .div_int_reg = CLK_ETH_TSU_DIV_INT,
> + .sel_reg = CLK_ETH_TSU_SEL,
> + .div_int_max = DIV_INT_8BIT_MAX,
> + .max_freq = 50 * HZ_PER_MHZ,
> + .fc0_src = FC_NUM(5, 7),
> + )),
> +
> + [RP1_CLK_SYS] = REGISTER_CLK(PARENT_CLK(3,
> + { .index = 0 },
> + { .index = -1 },
> + { .hw = &clk_desc_array[RP1_PLL_SYS].hw }
> + ),
> + CLK_DATA(rp1_clock_data,
> + .name = "clk_sys",
> + .num_std_parents = 3,
> + .num_aux_parents = 0,
> + .ctrl_reg = CLK_SYS_CTRL,
> + .div_int_reg = CLK_SYS_DIV_INT,
> + .sel_reg = CLK_SYS_SEL,
> + .div_int_max = DIV_INT_24BIT_MAX,
> + .max_freq = 200 * HZ_PER_MHZ,
> + .fc0_src = FC_NUM(0, 4),
> + .clk_src_mask = 0x3,
> + )),
> +
> + [RP1_PLL_SYS_PRI_PH] = REGISTER_PLL_PH(PARENT_CLK(1,
> + { .hw = &clk_desc_array[RP1_PLL_SYS].hw }
> + ),
> + CLK_DATA(rp1_pll_ph_data,
> + .name = "pll_sys_pri_ph",
> + .ph_reg = PLL_SYS_PRIM,
> + .fixed_divider = 2,
> + .phase = RP1_PLL_PHASE_0,
> + .fc0_src = FC_NUM(1, 2),
> + )),
> +
> + [RP1_PLL_SYS_SEC] = REGISTER_PLL_DIV(PARENT_CLK(1,
> + { .hw = &clk_desc_array[RP1_PLL_SYS_CORE].hw }
> + ),
> + CLK_DATA(rp1_pll_data,
> + .name = "pll_sys_sec",
> + .ctrl_reg = PLL_SYS_SEC,
> + .fc0_src = FC_NUM(2, 2),
> + )),
> +};
> +
> +static const struct regmap_range rp1_reg_ranges[] = {
> + regmap_reg_range(PLL_SYS_CS, PLL_SYS_SEC),
> + regmap_reg_range(PLL_AUDIO_CS, PLL_AUDIO_TERN),
> + regmap_reg_range(PLL_VIDEO_CS, PLL_VIDEO_SEC),
> + regmap_reg_range(GPCLK_OE_CTRL, GPCLK_OE_CTRL),
> + regmap_reg_range(CLK_SYS_CTRL, CLK_SYS_DIV_INT),
> + regmap_reg_range(CLK_SYS_SEL, CLK_SYS_SEL),
> + regmap_reg_range(CLK_SLOW_SYS_CTRL, CLK_SLOW_SYS_DIV_INT),
> + regmap_reg_range(CLK_SLOW_SYS_SEL, CLK_SLOW_SYS_SEL),
> + regmap_reg_range(CLK_DMA_CTRL, CLK_DMA_DIV_INT),
> + regmap_reg_range(CLK_DMA_SEL, CLK_DMA_SEL),
> + regmap_reg_range(CLK_UART_CTRL, CLK_UART_DIV_INT),
> + regmap_reg_range(CLK_UART_SEL, CLK_UART_SEL),
> + regmap_reg_range(CLK_ETH_CTRL, CLK_ETH_DIV_INT),
> + regmap_reg_range(CLK_ETH_SEL, CLK_ETH_SEL),
> + regmap_reg_range(CLK_PWM0_CTRL, CLK_PWM0_SEL),
> + regmap_reg_range(CLK_PWM1_CTRL, CLK_PWM1_SEL),
> + regmap_reg_range(CLK_AUDIO_IN_CTRL, CLK_AUDIO_IN_DIV_INT),
> + regmap_reg_range(CLK_AUDIO_IN_SEL, CLK_AUDIO_IN_SEL),
> + regmap_reg_range(CLK_AUDIO_OUT_CTRL, CLK_AUDIO_OUT_DIV_INT),
> + regmap_reg_range(CLK_AUDIO_OUT_SEL, CLK_AUDIO_OUT_SEL),
> + regmap_reg_range(CLK_I2S_CTRL, CLK_I2S_DIV_INT),
> + regmap_reg_range(CLK_I2S_SEL, CLK_I2S_SEL),
> + regmap_reg_range(CLK_MIPI0_CFG_CTRL, CLK_MIPI0_CFG_DIV_INT),
> + regmap_reg_range(CLK_MIPI0_CFG_SEL, CLK_MIPI0_CFG_SEL),
> + regmap_reg_range(CLK_MIPI1_CFG_CTRL, CLK_MIPI1_CFG_DIV_INT),
> + regmap_reg_range(CLK_MIPI1_CFG_SEL, CLK_MIPI1_CFG_SEL),
> + regmap_reg_range(CLK_PCIE_AUX_CTRL, CLK_PCIE_AUX_DIV_INT),
> + regmap_reg_range(CLK_PCIE_AUX_SEL, CLK_PCIE_AUX_SEL),
> + regmap_reg_range(CLK_USBH0_MICROFRAME_CTRL, CLK_USBH0_MICROFRAME_DIV_INT),
> + regmap_reg_range(CLK_USBH0_MICROFRAME_SEL, CLK_USBH0_MICROFRAME_SEL),
> + regmap_reg_range(CLK_USBH1_MICROFRAME_CTRL, CLK_USBH1_MICROFRAME_DIV_INT),
> + regmap_reg_range(CLK_USBH1_MICROFRAME_SEL, CLK_USBH1_MICROFRAME_SEL),
> + regmap_reg_range(CLK_USBH0_SUSPEND_CTRL, CLK_USBH0_SUSPEND_DIV_INT),
> + regmap_reg_range(CLK_USBH0_SUSPEND_SEL, CLK_USBH0_SUSPEND_SEL),
> + regmap_reg_range(CLK_USBH1_SUSPEND_CTRL, CLK_USBH1_SUSPEND_DIV_INT),
> + regmap_reg_range(CLK_USBH1_SUSPEND_SEL, CLK_USBH1_SUSPEND_SEL),
> + regmap_reg_range(CLK_ETH_TSU_CTRL, CLK_ETH_TSU_DIV_INT),
> + regmap_reg_range(CLK_ETH_TSU_SEL, CLK_ETH_TSU_SEL),
> + regmap_reg_range(CLK_ADC_CTRL, CLK_ADC_DIV_INT),
> + regmap_reg_range(CLK_ADC_SEL, CLK_ADC_SEL),
> + regmap_reg_range(CLK_SDIO_TIMER_CTRL, CLK_SDIO_TIMER_DIV_INT),
> + regmap_reg_range(CLK_SDIO_TIMER_SEL, CLK_SDIO_TIMER_SEL),
> + regmap_reg_range(CLK_SDIO_ALT_SRC_CTRL, CLK_SDIO_ALT_SRC_DIV_INT),
> + regmap_reg_range(CLK_SDIO_ALT_SRC_SEL, CLK_SDIO_ALT_SRC_SEL),
> + regmap_reg_range(CLK_GP0_CTRL, CLK_GP0_SEL),
> + regmap_reg_range(CLK_GP1_CTRL, CLK_GP1_SEL),
> + regmap_reg_range(CLK_GP2_CTRL, CLK_GP2_SEL),
> + regmap_reg_range(CLK_GP3_CTRL, CLK_GP3_SEL),
> + regmap_reg_range(CLK_GP4_CTRL, CLK_GP4_SEL),
> + regmap_reg_range(CLK_GP5_CTRL, CLK_GP5_SEL),
> + regmap_reg_range(CLK_SYS_RESUS_CTRL, CLK_SYS_RESUS_CTRL),
> + regmap_reg_range(CLK_SLOW_SYS_RESUS_CTRL, CLK_SLOW_SYS_RESUS_CTRL),
> + regmap_reg_range(FC0_REF_KHZ, FC0_RESULT),
> + regmap_reg_range(VIDEO_CLK_VEC_CTRL, VIDEO_CLK_VEC_DIV_INT),
> + regmap_reg_range(VIDEO_CLK_VEC_SEL, VIDEO_CLK_DPI_DIV_INT),
> + regmap_reg_range(VIDEO_CLK_DPI_SEL, VIDEO_CLK_MIPI1_DPI_SEL),
> +};
> +
> +static const struct regmap_access_table rp1_reg_table = {
> + .yes_ranges = rp1_reg_ranges,
> + .n_yes_ranges = ARRAY_SIZE(rp1_reg_ranges),
> +};
> +
> +static const struct regmap_config rp1_clk_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = PLL_VIDEO_SEC,
> + .name = "rp1-clk",
> + .rd_table = &rp1_reg_table,
> +};
> +
> +static int rp1_clk_probe(struct platform_device *pdev)
> +{
> + const size_t asize = ARRAY_SIZE(clk_desc_array);
> + struct rp1_clk_desc *desc;
> + struct device *dev = &pdev->dev;
> + struct rp1_clockman *clockman;
> + struct clk_hw **hws;
> + unsigned int i;
> +
> + clockman = devm_kzalloc(dev, struct_size(clockman, onecell.hws, asize),
> + GFP_KERNEL);
> + if (!clockman)
> + return -ENOMEM;
> +
> + spin_lock_init(&clockman->regs_lock);
> + clockman->dev = dev;
> +
> + clockman->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(clockman->regs))
> + return PTR_ERR(clockman->regs);
> +
> + clockman->regmap = devm_regmap_init_mmio(dev, clockman->regs,
> + &rp1_clk_regmap_cfg);
> + if (IS_ERR(clockman->regmap)) {
> + dev_err(dev, "could not init clock regmap\n");
return dev_err_probe()?
> + return PTR_ERR(clockman->regmap);
> + }
> +
> + clockman->onecell.num = asize;
> + hws = clockman->onecell.hws;
> +
> + for (i = 0; i < asize; i++) {
> + desc = &clk_desc_array[i];
> + if (desc->clk_register && desc->data) {
> + hws[i] = desc->clk_register(clockman, desc);
> + if (IS_ERR_OR_NULL(hws[i]))
> + dev_err_probe(dev, PTR_ERR(hws[i]),
> + "Unable to register clock: %s\n",
> + clk_hw_get_name(hws[i]));
> + }
> + }
> +
> + platform_set_drvdata(pdev, clockman);
> +
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> + &clockman->onecell);
> +}
Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Date: Mon, 28 Oct 2024 15:20:55 -0700
- In-reply-to: <c20e3d6d87c71691b149cdeeafc94009953346b2.1730123575.git.andrea.porta@suse.com>
- References: <cover.1730123575.git.andrea.porta@suse.com> <c20e3d6d87c71691b149cdeeafc94009953346b2.1730123575.git.andrea.porta@suse.com>
- User-agent: alot/0.10
- Follow-Ups:
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- References:
- [PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrea della Porta
- [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta
- [PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay
- Prev by Date: Re: [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- Next by Date: Re: [PATCH 2/3] pinctrl: sophgo: add support for SG2042 SoC
- Previous by thread: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- Next by thread: Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- Index(es):
 |