Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1

[Andrea della Porta <andrea.porta@xxxxxxxx>]

Hi Herve,

On 18:32 Wed 23 Oct     , Herve Codina wrote:
> Hi Andrea,
> 
> 
> On Wed, 23 Oct 2024 17:36:06 +0200
> Andrea della Porta <andrea.porta@xxxxxxxx> wrote:
> 
> > Hi Stephen,
> > 
> > On 15:08 Wed 09 Oct     , Stephen Boyd wrote:
> > > Quoting Andrea della Porta (2024-10-07 05:39:51)  
> > > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > > > index 299bc678ed1b..537019987f0c 100644
> > > > --- a/drivers/clk/Kconfig
> > > > +++ b/drivers/clk/Kconfig
> > > > @@ -88,6 +88,15 @@ config COMMON_CLK_RK808
> > > >           These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
> > > >           Clkout1 is always on, Clkout2 can off by control register.
> > > >  
> > > > +config COMMON_CLK_RP1
> > > > +       tristate "Raspberry Pi RP1-based clock support"
> > > > +       depends on PCI || COMPILE_TEST  
> > > 
> > > A better limit would be some ARCH_* config.  
> > 
> > I've avoided ARCH_BCM2835 since the original intention is for this driver
> > to work (in the future) also for custom PCI cards with RP1 on-board, and not
> > only for Rpi5.
> 
> Maybe depends on CONFIG_MISC_RP1 ?
> CONFIG_MISC_RP1 enables the RP1 PCI driver

Yep, seems the most logical one, thanks.

Regards,
Andrea

> 
> Best regards,
> Hervé