Hi, On 11/20/2015 9:55 AM, Yendapally Reddy Dhananjaya Reddy wrote:
This patchset contains the pinmux support for the Broadcom's Northstar Plus (NSP) SOC. The first patch provides the documentation details and the second patch contains the driver details. The third patch contains the enable method. This patchset has been tested on NSP bcm958625HR board. This patchset is based on v4.4.0-rc1 and is available from github repo: https://github.com/Broadcom/cygnus-linux.git branch: nsp-pinmux-v1 Yendapally Reddy Dhananjaya Reddy (3): pinctrl: Broadcom NSP pinctrl device tree bindings pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC ARM: dts: enable pinctrl for Broadcom NSP .../bindings/pinctrl/brcm,nsp-pinmux.txt | 79 +++ arch/arm/boot/dts/bcm-nsp.dtsi | 7 + arch/arm/boot/dts/bcm958625k.dts | 9 + drivers/pinctrl/bcm/Kconfig | 13 + drivers/pinctrl/bcm/Makefile | 1 + drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 +++++++++++++++++++++ 6 files changed, 759 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
This entire patch set looks good to me. Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx> Thanks, Ray -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
