Hi Krzysztof, On 08:24 Tue 08 Oct , Krzysztof Kozlowski wrote: > On Mon, Oct 07, 2024 at 02:39:46PM +0200, Andrea della Porta wrote: > > Common YAML schema for devices that exports internal peripherals through > > PCI BARs. The BARs are exposed as simple-buses through which the > > peripherals can be accessed. > > > > This is not intended to be used as a standalone binding, but should be > > included by device specific bindings. > > It still has to be tested before posting... Mailing list is not a > testing service. My and Rob's machines are not a testing service. Sorry about that, I must have missed that file when rechecking all the schemas after rebasing on 6.12-rc1. > > > > > Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx> > > --- > > .../devicetree/bindings/pci/pci-ep-bus.yaml | 69 +++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 70 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > > > > diff --git a/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml b/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > > new file mode 100644 > > index 000000000000..9d7a784b866a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > > @@ -0,0 +1,69 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pci/pci-ep-bus.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Common properties for PCI MFD endpoints with peripherals addressable from BARs. > > Drop full stop and capitalize it. Ack. > > > + > > +maintainers: > > + - Andrea della Porta <andrea.porta@xxxxxxxx> > > + > > +description: > > + Define a generic node representing a PCI endpoint which contains several sub- > > + peripherals. The peripherals can be accessed through one or more BARs. > > + This common schema is intended to be referenced from device tree bindings, and > > + does not represent a device tree binding by itself. > > + > > +properties: > > + "#address-cells": > > Use consistent quotes, either ' or ". Ack. Many thanks, Andrea > > Best regards, > Krzysztof >